Lenovo TD100 Bedienungsanleitung PDF herunterladen (Seite 36)

Select this choice to create, manage, or delete arrays, add or delete a hot-spare

drive, or initialize drives.

v SerialSelect Utility

Select this choice to configure the controller interface definitions or to configure

the physical transfer and SAS or SATA address of the selected drive.

v Disk Utilities

Select this choice to format a disk or verify the disk media. Select a device from

the list and read the instructions on the screen carefully before making a

selection.

Starting RAID Configuration Utility program: To start the IBM ServeRAID

Configuration Utility program, complete the following steps:

1. Turn on the server.

2. When the message Press <CTRL><A> for IBM ServeRAID Configuration

Utility appears, press Ctrl+A. If you have set an administrative password, you

are prompted to type the password.

3. To select a choice from the menu, use the arrow keys to highlight it and press

Enter.

Creating a RAID array: To use the IBM ServeRAID Configuration Utility to

configure a RAID level-1 array, complete the following steps:

1. From the IBM ServeRAID Configuration Utility program menu, select Array

Configuration Utility.

2. Select Create Array.

3. From the list of ready drives, select the two drives that you want to group into

the array.

4. When you are prompted to select the RAID type, select RAID 0 or RAID-1.

5. (Optional) Type an identifier for the array.

6. When you are prompted for the array build method, select Quick Init.

7. Follow the instructions on the screen to complete the configuration; then, select

Done to exit.

8. Restart the server.

Viewing the array configuration: To view information about the RAID array,

complete the following steps:

1. Start the IBM ServeRAID Configuration Utility program.

2. From the IBM ServeRAID Configuration Utility window, select Manage Arrays.

3. Select an array and press Enter.

4. To exit from the program, press Esc.

Configuring simple-swap SATA RAID

Use the Adaptec RAID Configuration Utility program to configure and manage

simple-swap SATA redundant array of independent disks (RAID) on simple-swap

SATA models with no ServeRAID adapter installed.

This utility is part of the BIOS code. The Adaptec RAID Configuration Utility

program adds RAID functionality to the integrated SATA controller. The integrated

Serial ATA (SATA) controller comes disabled by default. You must enable it and

install the device drivers before you can use it. The device drivers, documentation,

and other information are available on the IBM ServeRAID-8e (Adaptec HostRAID)

Support CD.

18 ThinkServer TD100 and TD100x: Hardware Maintenance Manual

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 253 254

Kommentare zu diesen Handbüchern

Keine Kommentare

Lenovo TD100 Bedienungsanleitung Seite 36

Kommentare zu diesen Handbüchern