Lenovo TD100 Bedienungsanleitung PDF herunterladen (Seite 24)

An LED on the system board might also be lit to help isolate the error. See

Chapter 5, “Diagnostics,” on page 147 for additional information.

USB connectors

Connect USB devices to these connectors.

CD or DVD-eject button

Press this button to release a CD from the CD drive or a DVD from the

DVD drive.

CD or DVD drive activity LED

When this LED is lit, it indicates that the CD drive or DVD drive is in use.

Ethernet transmit/receive activity LED

This LED is on the Ethernet connector on the rear of the server. When this

LED is lit, it indicates that there is activity between the server and the

network.

Ethernet link status LED

This LED is on the Ethernet connector on the rear of the server. When this

LED is lit, it indicates that there is an active connection on the Ethernet

port.

Hot-swap hard disk drive activity LED (some models)

On some server models, each hot-swap drive has a hard disk drive activity

LED. When this green LED is flashing, it indicates that the drive is in use.

When the drive is removed, this LED also is visible on the SAS backplane,

next to the drive connector. The backplane is the printed circuit board

behind drive bays 4 through 11.

Hot-swap hard disk drive status LED (some models)

On some server models, each hot-swap hard disk drive has an amber

status LED. If this amber status LED for a drive is lit, it indicates that the

associated hard disk drive has failed.

If an optional ServeRAID

™

adapter is installed in the server and the LED

flashes slowly (one flash per second), the drive is being rebuilt. If the LED

flashes rapidly (three flashes per second), the adapter is identifying the

drive.

When the drive is removed, this LED also is visible on the SAS/SATA

backplane, below the hot-swap hard disk drive activity LED.

6 ThinkServer TD100 and TD100x: Hardware Maintenance Manual

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 253 254

Keine Kommentare

Lenovo TD100 Bedienungsanleitung Seite 24