search

Lenovo TD100 Bedienungsanleitung Seite 228

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 254
  • Inhaltsverzeichnis
  • LESEZEICHEN
    • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 227
v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v See Chapter 3, “Parts listing, TD100 Types 6398, 6399, 6419, 6429, 4203, and 4206,” on page 25 to
determine which components are customer replaceable units (CRU) and which components are field
replaceable units (FRU).
v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
System-error log message Action
System over recommended voltage for +12v
1. Reseat the following components:
a. Hot-swap power supplies (if any are installed)
b. (Trained service technician only) Power-supply cables on
the system board
2. (Trained service technician only) Replace the system board.
System over recommended voltage on +2.5v
1. Reseat the following components:
a. Hot-swap power supplies (if any are installed)
b. (Trained service technician only) Power-supply cables on
the system board
2. (Trained service technician only) Replace the system board.
System over recommended voltage on
continuous +5v
1. Reseat the following components:
a. Hot-swap power supplies (if any are installed)
b. (Trained service technician only) Power-supply cables on
the system board
2. (Trained service technician only) Replace the system board.
System shut off due to system board under
temperature
1. Make sure that the fans have good airflow and are not
obstructed.
2. (Trained service technician only) Replace the system board.
System shutoff due to +12v over voltage
1. Reseat the following components:
a. Hot-swap power supplies (if any are installed)
b. (Trained service technician only) Power-supply cables on
the system board
2. (Trained service technician only) Replace the system board.
System shutoff due to +12v under voltage
1. Reseat the following components:
a. Hot-swap power supplies (if any are installed)
b. (Trained service technician only) Power-supply cables on
the system board
2. (Trained service technician only) Replace the system board.
System shutoff due to +2.5v over voltage
1. Reseat the following components:
a. Hot-swap power supplies (if any are installed)
b. (Trained service technician only) Power-supply cables on
the system board
2. (Trained service technician only) Replace the system board.
System shutoff due to +2.5v under voltage
1. Reseat the following components:
a. Hot-swap power supplies (if any are installed)
b. (Trained service technician only) Power-supply cables on
the system board
2. (Trained service technician only) Replace the system board.
210 ThinkServer TD100 and TD100x: Hardware Maintenance Manual
Seitenansicht 227
1 2 ... 223 224 225 226 227 228 229 230 231 232 233 ... 253 254

Kommentare zu diesen Handbüchern

Keine Kommentare
  • Dream-property Inverto Citrix Emprex Sigtronics
  • Philips Auto-Videosysteme Kohler Wasserhähne Lincoln Schweißsystem Honeywell Sicherheitskameras Panasonic Wasserpumpen
  • Electrolux MB43T Lexmark X945 Campbell CR1000 Remington Ci76 AT&T 954
  • Minolta 5450 Betriebsanweisung StarTech.com DVIIDMM20 Datenblatt Acer Veriton X4620G Bedienungsanleitung Panasonic NNGD37HS Betriebsanleitung Samsung RT35K5430S8 Bedienungsanleitung