Lenovo TD100 Bedienungsanleitung PDF herunterladen (Seite 142)

Installing the control-panel assembly

To install the control-panel assembly, complete the following steps.

1. Position the front end of the control-panel assembly in the channel above drive

bay 1.

2. Slide the control-panel assembly toward the front of the chassis until it clicks

into place.

3. Reroute and connect the control-panel assembly cable to the system board

(see “System-board internal connectors” on page 10 for the location of the

front panel connector).

4. Slide the drives in bay 1 and bay 2 back into the drive bays if you pushed

them slightly out earlier (see “Installing a CD or DVD drive” on page 87 for

more information).

5. Reinstall the front fan cage assembly (see “Installing the front system fan cage

assembly” on page 109.

6. Press the power-supply cage release tab and rotate the power-supply cage

assembly into the chassis until it locks in place.

7. Return the power-supply cage handle to the locked position.

8. If you have a hot-swap model, reinstall the hot-swap power supplies (see

“Installing a hot-swap power supply” on page 96).

9. Replace the bezel (see “Replacing the bezel” on page 77).

10. Install the side cover (see “Installing the side cover” on page 79).

11. Lock the side cover.

12. Reconnect the external cables and power cords; then, turn on the attached

devices and turn on the server.

124 ThinkServer TD100 and TD100x: Hardware Maintenance Manual

1 2 ... 137 138 139 140 141 142 143 144 145 146 147 ... 253 254

Keine Kommentare

Lenovo TD100 Bedienungsanleitung Seite 142