Lenovo TD100 Bedienungsanleitung PDF herunterladen (Seite 124)

Removing the rear system fan cage assembly with baffle

Attention:

v Replace a failed fan within 48 hours.

v To ensure proper cooling and airflow, do not operate the server for more than 30

minutes with the side cover removed.

To remove the rear system fan cage assembly with baffle, complete the following

steps:

1. Read the safety information that begins on page vii and “Installation guidelines”

on page 73.

2. Turn off the server and all attached devices; then, disconnect all power cords

and external cables.

3. Unlock and remove the side cover (see “Removing the side cover” on page 78).

4. Disconnect the rear system fan cage assembly cable from the system board,

making a note of where the cable was connected for later installation.

5. Pull outward on the spring-loaded lock pin and slide the rear system fan cage

assembly to the left to release it from the mounting tabs on the chassis; then,

remove it from the server.

6. If you are instructed to return the fan cage assembly, follow all packaging

instructions, and use any packaging materials for shipping that are supplied to

you.

Installing the rear system fan cage assembly with baffle

Attention:

v Replace a failed fan within 48 hours.

v To ensure proper cooling and airflow, do not operate the server for more than 30

minutes with the side cover removed.

To install the rear system fan cage assembly with baffle, complete the following

steps:

1. Unlock and remove the side cover (see “Removing the side cover” on page 78).

2. Insert the rear system fan assembly retainer tabs into the corresponding

mounting tabs on the chassis; then, slide the rear fan cage assembly 1 to the

right until it locks into the mounting tabs on the chassis.

106 ThinkServer TD100 and TD100x: Hardware Maintenance Manual

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 253 254

Keine Kommentare

Lenovo TD100 Bedienungsanleitung Seite 124