Lenovo TD100 Bedienungsanleitung PDF herunterladen (Seite 109)

9. Check the hard disk drive status indicator to make sure that the hard disk drive

is operating correctly. (You might have to restart the server for the drive to be

recognized.) If the amber hard disk drive status LED for a drive is lit

continuously, it indicates that the drive is faulty and must be replaced. If the

amber hard disk drive status LED for a drive is flashing slowly, this indicates

that the drive is being rebuilt. If the amber hard disk drive status LED for a

drive is flashing rapidly, this indicates that the controller is identifying the drive.

If the green hard disk drive activity LED is flashing, this indicates that the drive

is in use.

Note: If the server is configured for RAID operation using an optional

ServeRAID controller, you might have to reconfigure the disk arrays after

replacing hard disk drives. See the ServeRAID documentation for additional

information about RAID operation and complete instructions for using

ServeRAID Manager.

10. Closed the bezel.

11. Install the side cover (see “Installing the side cover” on page 79.

12. Lock the side cover.

13. Reconnect the external cables and power cords; then, turn on the attached

devices and turn on the server.

Chapter 4. Removing and replacing server components 91

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 253 254

Keine Kommentare

Lenovo TD100 Bedienungsanleitung Seite 109