Lenovo Px4-300r Bedienungsanleitung Seite 66

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 165
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 65
Changing RAID Protection Types
You can change the RAID protection of existing Storage Pools. You can also set the RAID protection type
when you add drives to your px4-300r Network Storage Array and create new Storage Pools. Protection
type can be changed only when the Storage Pool is in a normal (healthy) state. If you are unfamiliar with
RAID protection, it is recommended that you do not change this setting.
Most changes to protection type will delete all data on the Storage Pool. You can make the
following protection type changes without deleting data:
Expanding a RAID 5 configuration by adding one or more drives.
Migrating from RAID 1 with two disks to a RAID 5 configuration with three or more disks.
Migrating from JBOD with one disk to RAID 1 with two disks.
To change the RAID type, expand the Information section of a Storage Pool on the Drive Management
page, and choose a value from the Protection drop-down menu:
Mirror (RAID 1)
Mirror Stripe (RAID 10)
Parity (RAID 5)
None (RAID 0)
For additional explanation on these RAID types, refer to Adding and Managing Storage Pools on page 48.
Note that the displayed available capacity changes as you select different RAID types from the Protection
drop-down menu. RAID array capacity is based on drive use, which differs for some RAID types.
Click Apply to change the RAID protection.
Click Cancel to retain your previous RAID configuration.
Storage Pool Management
Changing RAID Protection Types 56
Seitenansicht 65
1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 164 165

Kommentare zu diesen Handbüchern

Keine Kommentare