Lenovo Px4-300r Bedienungsanleitung Seite 16

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 165
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 15
Connecting the px4-300r
Initial Setup
If you have purchased more than one px4-300r, complete all steps on one device before setting up
additional devices.
6. Make sure at least one hard drive is installed in the px4-300r.
7. Use the included network cable to connect the px4-300r to your network hub or switch.
8. Connect the included power cord to the back of the px4-300r and to an Uninterruptible Power
Supply (UPS).
9. Power on the px4-300r.
10. From a computer on your network, open a web browser and go to http://setup.lenovoemc.com to
set up your px4-300r on your network. For best results, use a computer that is connected to the
same subnet or network segment as the px4-300r.
You can access the px4-300r Management Console directly by entering the IP address or model
name of your px4-300r in your computer’s web browser. To use the model name on a Mac, add
.local after the name in the browser (for example, px4-300r.local).
11. OPTIONAL: if desired, install the LenovoEMC Storage Manager and Media Aggregation software.
If you install LenovoEMC Storage Manager, its icon will appear in the System Tray (Windows) or
Menu Bar (Mac). The LenovoEMC Storage Manager will automatically scan your network and
connect to available Shares.
If you receive a message from your operating system's firewall alerting you of network activity, be
sure to unblock communications.
Mac Users: Shares on the px4-300r will mount and appear on the Mac Desktop.
PC Users: Shares on the px4-300r will automatically be assigned a drive letter and will be
available in the Network Drives section under My Computer.
Network Settings
The Network page of your px4-300r is where you make changes to set up network connectivity. The
Network page displays your current network settings and enables those settings to be modified. On this
page, you can identify your DNS servers and WINS servers and how your system's IP address is
determined. Most system IP addresses and other network settings can normally be configured
automatically.
Manually Configuring Your Network
If you are comfortable with network technology and want to configure the network, refer to Manually
Configuring Network Settings.
Bonded NICs
If your px4-300r has multiple network interface cards (NICs), you can bond those NICs. Refer to Bonding
NICs.
Setting up Your px4-300r Network Storage Array
6 Network Connection
Seitenansicht 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 164 165

Kommentare zu diesen Handbüchern

Keine Kommentare