Lenovo LF80565QH0254M Datenblatt Seite 112
- Seite / 142
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Features
112 Document Number: 318080-002
processor. The chipset needs to account for a variable number of processors asserting
the Stop Grant SBC on the bus before allowing the processor to be transitioned into one
of the lower processor power states.
7.2.1 Normal State
This is the normal operating state for the processor.
7.2.2 HALT or Extended HALT State
The Extended HALT state (C1E) is enabled via the BIOS. The Extended HALT state
must be enabled for the processor to remain within its specifications. The
Extended HALT state requires support for dynamic VID transitions in the platform.
7.2.2.1 HALT State
HALT is a low power state entered when the processor has executed the HALT or
MWAIT instruction. When one of the processor cores executes the HALT or MWAIT
instruction, that processor core is halted; however, the other processor cores continue
normal operation. The processor will transition to the Normal state upon the occurrence
of SMI#, BINIT#, INIT#, LINT[1:0] (NMI, INTR), or an interrupt delivered over the
front side bus. RESET# will cause the processor to immediately initialize itself.
The return from a System Management Interrupt (SMI) handler can be to either
Normal Mode or the HALT state. See the Intel®64 and IA-32 Architectures Software
Developer's Manual, Volume III: System Programming Guide for more information.
The system can generate a STPCLK# while the processor is in the HALT state. When
the system deasserts STPCLK#, the processor will return execution to the HALT state.
While in HALT state, the processor will process front side bus snoops and interrupts.
7.2.2.2 Extended HALT State
Extended HALT state is a low power state entered when all processor cores have
executed the HALT or MWAIT instructions and Extended HALT state has been enabled
via the BIOS. When one of the processor cores executes the HALT instruction, that
processor core is halted; however, the other processor cores continue normal
operation. The Extended HALT state is a lower power state than the HALT state or Stop
Grant state. The Extended HALT state must be enabled for the processor to remain
within its specifications.
Note: Not all Intel
®
Xeon
®
Processor 7200 Series and 7300 Series are capable of supporting
Extended HALT State. More detail on which processor frequencies will support this
feature will be provided in future releases of the Intel® Xeon® Processor 7200, 7300
Series Specification Update when available.
The processor will automatically transition to a lower core frequency and voltage
operating point before entering the Extended HALT state. Note that the processor FSB
frequency is not altered; only the internal core frequency is changed. When entering
the low power state, the processor will first switch to the lower bus to core frequency
ratio and then transition to the lower voltage (VID).
While in the Extended HALT state, the processor will process bus snoops.
- Processor 7200 Series 1
- Contents 3
- 4 Document Number: 318080-002 4
- Document Number: 318080-002 5 5
- 6 Document Number: 318080-002 6
- Document Number: 318080-002 7 7
- Revision History 8
- 1 Introduction 9
- 1.1 Terminology 11
- Introduction 12
- 1.2 State of Data 13
- 1.3 References 13
- 2 Electrical Specifications 15
- Clocking 16
- 2.3.2 PLL Power Supply 17
- Electrical Specifications 18
- Table 2-4. FSB Signal Groups 21
- Asynchronous Signals 22
- 2.9 Mixing Processors 23
- CC_VTT_OUT 27
- Time Duration (s) 28
- Sustained Current (A) 28
- Table 2-10. V 30
- Load Lines 32
- Static and Transient 34
- Tolerance Load Lines 34
- Specifications 35
- 2.11.2.1 DC Characteristics 36
- 2.11.3 V 37
- Overshoot Specification 37
- Example Overshoot Waveform 38
- Tp = T1: BCLK[1:0] period 47
- THERMTRIP# 51
- Figure 2-26. VID Step Timings 54
- 3 Mechanical Specifications 57
- Mechanical Specifications 58
- 3.7 Processor Materials 67
- 3.8 Processor Markings 68
- Processor 69
- 4 Pin Listing 71
- 10 of 16) 75
- 11 of 16) 76
- 12 of 16) 76
- 13 of 16) 77
- 14 of 16) 77
- 15 of 16) 78
- 16 of 16) 78
- 1 of 14) 79
- 2 of 14) 79
- 3 of 14) 80
- 4 of 14) 80
- 5 of 14) 81
- 6 of 14) 81
- 8 of 14) 82
- 7 of 14) 82
- 9 of 14) 83
- 10 of 14) 83
- 11 of 14) 84
- 12 of 14) 84
- 13 of 14) 85
- 14 of 14) 85
- Pin Listing 86
- 5 Signal Definitions 87
- CC and BCLK have reached 92
- 6 Thermal Specifications 95
- CASE_MAX 96
- Thermal Profile 98
- = 0.162 x Power + 45 98
- Pow er (W) 100
- Temperature (C) 100
- = 0.420 x Power + 45 100
- = 0.238 x Power + 45 101
- 6.1.2 Thermal Metrology 102
- 6.2.2 Thermal Monitor 103
- 6.2.3 Thermal Monitor 2 104
- 6.2.4 On-Demand Mode 105
- 6.2.5 PROCHOT# Signal 106
- 6.2.6 FORCEPR# Signal 106
- 6.2.7 THERMTRIP# Signal 106
- 6.3.1 Introduction 107
- 6.3.2 PECI Specifications 108
- 7 Features 111
- 7.2.1 Normal State 112
- EXTENDED_HALT 113
- 7.2.3 Stop-Grant State 114
- 7.3 Enhanced Intel SpeedStep 115
- Technology 115
- Features 116
- 7.4.1 SMBus Device Addressing 117
- Transactions 118
- 7.4.3.1 Header 121
- 7.4.3.2 Processor Data 125
- 7.4.3.3 Processor Core Data 126
- 16h-19h 127
- 1Ah-1Bh 127
- Offset: 1Ch 128
- 1Dh-1Eh 128
- 1Fh-20h 128
- 7.4.3.4 Cache Data 129
- 7.4.3.5 Package Data 131
- 7.4.3.6 Part Number Data 132
- 38h-3Eh 133
- 3Fh-4Ch 133
- 4Dh=54h 133
- 55h-6Eh 134
- 71h-72h 134
- 7.4.3.8 Feature Data 135
- 7.4.3.9 Other Data 136
- 7.4.4 Checksums 137
- 7.4.5 Scratch EEPROM 137
- 8.1 Introduction 139
- 8.2 Thermal Specifications 139
- 9 Debug Tools Specifications 141
- Debug Tools Specifications 142
Verwandte Produkte und Handbücher für Prozessoren Lenovo LF80565QH0254M
Prozessoren Lenovo 59P5107 Datenblatt
(102 Seiten)
(102 Seiten)
Prozessoren Lenovo AD80582QH056003 Datenblatt
(136 Seiten)
(136 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.562 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern