Lenovo AD80582QH056003 Datenblatt Seite 82

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 136
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 81
Signal Definitions
82 Intel® Xeon® Processor 7400 Series Datasheet
BINIT# I/O BINIT# (Bus Initialization) may be observed and driven by all processor FSB
agents and if used, must connect the appropriate pins of all such agents. If the
BINIT# driver is enabled during power on configuration, BINIT# is asserted to
signal any bus condition that prevents reliable future operation.
If BINIT# observation is enabled during power-on configuration (see Section 7.1)
and BINIT# is sampled asserted, symmetric agents reset their bus LOCK# activity
and bus request arbitration state machines. The bus agents do not reset their I/O
Queue (IOQ) and transaction tracking state machines upon observation of BINIT#
assertion. Once the BINIT# assertion has been observed, the bus agents will re-
arbitrate for the FSB and attempt completion of their bus queue and IOQ entries.
If BINIT# observation is disabled during power-on configuration, a priority agent
may handle an assertion of BINIT# as appropriate to the error handling
architecture of the system.
BNR# I/O BNR# (Block Next Request) is used to assert a bus stall by any bus agent who is
unable to accept new bus transactions. During a bus stall, the current bus owner
cannot issue any new transactions.
Since multiple agents might need to request a bus stall at the same time, BNR# is
a wired-OR signal which must connect the appropriate pins of all processor FSB
agents. In order to avoid wired-OR glitches associated with simultaneous edge
transitions driven by multiple drivers, BNR# is activated on specific clock edges
and sampled on specific clock edges.
BPM5#
BPM4#
BPM3#
BPM[2:1]#
BPM0#
I/O
O
I/O
O
I/O
BPM[5:0]# (Breakpoint Monitor) are breakpoint and performance monitor signals.
They are outputs from the processor which indicate the status of breakpoints and
programmable counters used for monitoring processor performance. BPM[5:0]#
should connect the appropriate pins of all FSB agents.
BPM4# provides PRDY# (Probe Ready) functionality for the TAP port. PRDY# is a
processor output used by debug tools to determine processor debug readiness.
BPM5# provides PREQ# (Probe Request) functionality for the TAP port. PREQ# is
used by debug tools to request debug operation of the processors.
BPM[5:4]# must be bussed to all bus agents. Please refer to the appropriate
platform design guidelines for more detailed information.
BPMb3#
BPMb[2:1]#
BPMb0#
I/O
O
I/O
BPMb[3:0]# (Breakpoint Monitor) are a second set of breakpoint and performance
monitor signals. They are additional outputs from the processor which indicate the
status of breakpoints and programmable counters used for monitoring processor
performance. BPMb[3:0]# should connect the appropriate pins of all FSB agents.
BPRI# I BPRI# (Bus Priority Request) is used to arbitrate for ownership of the processor
FSB. It must connect the appropriate pins of all processor FSB agents. Observing
BPRI# active (as asserted by the priority agent) causes all other agents to stop
issuing new requests, unless such requests are part of an ongoing locked
operation. The priority agent keeps BPRI# asserted until all of its requests are
completed, then releases the bus by deasserting BPRI#.
BR[1:0]# I/O The BR[1:0]# signals are sampled on the active-to-inactive transition of RESET#.
The signal which the agent samples asserted determines its agent ID. BR0# drives
the BREQ0# signal in the system and is used by the processor to request the bus.
These signals do not have on-die termination and must be terminated.
BSEL[2:0] O The BCLK[1:0] frequency select signals BSEL[2:0] are used to select the processor
input clock frequency. Table 2-2 defines the possible combinations of the signals
and the frequency associated with each combination. The required frequency is
determined by the processors, chipset, and clock synthesizer. All FSB agents must
operate at the same frequency. For more information about these signals,
including termination recommendations, refer to the appropriate platform design
guideline.
COMP[3:0] I COMP[3:0] must be terminated to VSS on the baseboard using precision resistors.
These inputs configure the AGTL+ drivers of the processor. Refer to the
appropriate platform design guidelines for implementation details.
Table 5-1. Signal Definitions (Sheet 2 of 8)
Name Type Description Notes
Seitenansicht 81
1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 135 136

Kommentare zu diesen Handbüchern

Keine Kommentare