Lenovo Computer Monitor 7098 Bedienungsanleitung PDF herunterladen (Seite 178)

4. Disconnect the signal and power cables from the rear of the hard disk drive

and remove the hard disk drive from the computer.

5. Remove the failing hard disk drive from the bracket by flexing the bracket as

6. To install the new drive, flex the bracket and align the pins on the bracket with

the recesses in the hard disk drive bracket.

Do not touch the circuit board on the bottom of the hard disk drive.

7. Connect the signal and power cables to the rear of the new hard disk drive.

8. Position the hard disk drive and bracket into the rear pivots and rotate

downward until the hard disk drive bracket latches into place.

9. Go to “Completing the FRU replacement” on page 179.

172 Hardware Maintenance Manual

Keine Kommentare

Lenovo Computer Monitor 7098 Bedienungsanleitung Seite 178