Lenovo Computer Monitor 7098 Bedienungsanleitung PDF herunterladen (Seite 153)

100

101

Completing the FRU replacement

After replacing FRUs, you need to install any removed parts, replace the cover, and

reconnect any cables, including telephone lines and power cords. Also, depending

on the FRU that is replaced, you might need to confirm the updated information in

the Setup Utility program.

Note: When the power cord is first plugged in, the computer might appear to turn

on for a few seconds and then turn off. This is a normal sequence to enable

the computer to initialize.

1. Ensure that all components have been reassembled correctly and that no tools

or loose screws are left inside your computer.

2. Replace the cover.

3. Reconnect the external cables and power cords to the computer. See “Rear

connectors” on page 114.

4. If you have replaced the system board, you must update (flash) the BIOS. See

“Updating (flashing) BIOS from a CD-ROM or diskette” on page 786.

5. Some FRU replacements require the configuration to be updated. See Chapter 6,

“Using the Setup Utility,” on page 51.

Chapter 9. Replacing FRUs - Tower Computers 147

1 2 ... 148 149 150 151 152 153 154 155 156 157 158 ... 797 798

Kommentare zu diesen Handbüchern

Keine Kommentare

Lenovo Computer Monitor 7098 Bedienungsanleitung Seite 153

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Motherboards Lenovo Computer Monitor 7098