Lenovo Computer Monitor 7098 Bedienungsanleitung PDF herunterladen (Seite 129)

100

101

17. Lower the microprocessor straight down into the system board socket of the

new system board.

18. To secure the microprocessor in the socket, close the microprocessor retainer

and lock it into position with the small handle.

19. Install the new retention module (if required) on the new system board.

20. Install the heat sink and fan assembly on the system board.

21. Connect the heat sink and fan assembly cable to the new system board. See

the system board illustration for your machine type at “System board

connectors” on page 116.

22. Install the new system board into the chassis and align the screw holes with

those in the chassis. Insert and tighten the screws that secure the system

board.

23. Pivot the hard disk drive back into position.

24. Connect the power and signal cables to the hard disk drive.

25. Connect all cables to the system board. See the system board illustration for

your machine type at “System board connectors” on page 116.

26. Go to “Completing the FRU replacement” on page 147.

Chapter 9. Replacing FRUs - Tower Computers 123

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 797 798

Kommentare zu diesen Handbüchern

Keine Kommentare

Lenovo Computer Monitor 7098 Bedienungsanleitung Seite 129

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Motherboards Lenovo Computer Monitor 7098