Lenovo Computer Monitor 7098 Bedienungsanleitung PDF herunterladen (Seite 115)

100

101

Replacing the system fan assembly

This procedure describes how to remove and replace the system fan assembly.

1. Remove cover. See “Removing the cover” on page 89.

2. To access system board components. See “Accessing system board components

and drives” on page 90.

3. Remove the hard disk drive. See “Replacing the hard disk drive” on page 103.

4. Disconnect the system fan cable from the system board. See “System board

connectors” on page 88.

5. Remove the two screws securing the system fan assembly.

6. Remove the system fan assembly by pulling the bracket outward and lifting it

up from the system board to remove completely.

7. Install the new system fan assembly and install the two screws that secure the

fan assembly.

8. Connect the system fan cable to the system fan connector on the system

board.

9. Reinstall the hard disk drive. See “Replacing the hard disk drive” on page

103.

10. Align the drive bay assembly with the two slots and rails on the sides of the

chassis and slide the drive bay assembly towards the rear of the chassis until

it snaps into position.

11. Reinstall the front bezel.

12. Go to “Completing the FRU replacement” on page 111.

Chapter 8. Replacing FRUs- Rocky computers 109

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 797 798

Kommentare zu diesen Handbüchern

Keine Kommentare

Lenovo Computer Monitor 7098 Bedienungsanleitung Seite 115

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Motherboards Lenovo Computer Monitor 7098