Lenovo Computer Monitor 7098 Bedienungsanleitung PDF herunterladen (Seite 114)

100

101

Replacing the front panel card

This procedure describes how to remove and replace the front panel card.

1. Remove cover. See “Removing the cover” on page 89.

2. To access system board components. See “Accessing system board components

and drives” on page 90.

3. Disconnect the front panel assembly cables from the system board. See the

system board illustration for your machine type at “System board connectors”

on page 88.

4. Remove the screw that secures the front panel card assembly to the chassis.

5. Note the front panel assembly cable routing and remove the assembly from

the chassis.

6. Route the cable for the new front panel card assembly through the hole in the

chassis and to the system board.

7. Install the front panel card assembly into the chassis and secure it with the

screw.

8. Connect the front panel assembly cables to the system board.

9. Align the drive bay assembly with the two slots and rails on the sides of the

chassis and slide the drive bay assembly towards the rear of the chassis until

it snaps into position.

10. Reinstall the front bezel.

11. Go to “Completing the FRU replacement” on page 111.

108 Hardware Maintenance Manual

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 797 798

Kommentare zu diesen Handbüchern

Keine Kommentare

Lenovo Computer Monitor 7098 Bedienungsanleitung Seite 114

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Motherboards Lenovo Computer Monitor 7098