2
B. For a home wired network: (Not Dial Up)
If you have one device (a combined modem and router)
1. Plug the device into an electrical outlet.
2. Plug one end of a phone cord or cable into the wide area network (WAN) port
of the device, and then plug the other end into the wall jack. The WAN port
should be labeled “WAN.” (DSL users: Do not use a DSL lter on the phone line.)
3. Plug one end of an Ethernet cable into the local area network (LAN) port on the
device, and then plug the other end into the networking port of the computer
that you want to connect to the Internet. The LAN port should be labeled “LAN.”
(If you are connecting wirelessly, skip this step.)
4. Start (or restart) the computer.
5. Plug in the cable and it will automatically connect you to the Internet.
If you have two devices (a separate modem and router)
1. Plug the modem into an electrical outlet.
2. Plug one end of a phone cord or cable into the modem, and plug the other end
into the wall jack. (DSL users: Do not use a DSL lter on the phone line.)
3. Plug one end of an Ethernet cable into the
modem, and plug the other end into the wide
area network (WAN) port on the router.
4. Plug the router into an electrical outlet.
5. Plug one end of an Ethernet cable into the local
area network (LAN) port on the router, and plug
the other end into the networking port on the
computer that you want to connect to the Internet.
(If you are connecting wirelessly, skip this step.)
6. Start (or restart) the computer.
7. Plug in the cable and it will automatically connect
you to the Internet.
C. For Dial Up ISP: *** You will have to call the PAVCS Help Desk at 877.883.3653, between
the hours of 8 a.m. and 6 p.m. Monday through Friday, to install the ISP Software.
Once the software is installed, set up can be followed via ISP set up routine.
These settings will only have to be changed if laptop is taken to
a new location that uses a dierent ISP or Internet access method.
5. Joining the PAVCS Network
A. After connecting to the internet through your home network,
please click on the “PAVCS Network” icon.
B. Click on the Internet Explorer Icon and Log in to PAVCS.BLACKBOARD.COM.
6. The next time you connect from the same location, just power up,
hit CTRL+ALT+DELETE type in your password and Double click on
the “PAVCS Network” icon.
7. If your student has an IEP 0r 504 and require special software/hardware,
please contact the PAVCS Help Desk at 877.883.3653.
Manual Setup For Wireless cont.
Lexmark X2670 Printer
1. Plug in the power cable.
2. Connect USB cable to the printer and the laptop.
3. The Printer Drivers will install automatically.
4. Follow the printer instructions to install the ink.
Wired Network: Combined Wired Network: Separate
5B.
Internet
Explorer
Icon
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern