Lenovo 59404953 Datenblatt PDF herunterladen (Seite 7)

About this manual

Electrical safety

Observe the following rules when working on electrical equipments.

Important:

Useonly approvedtoolsandtestequipments.Somehandtoolshavehandles

coveredwithasoftmaterialthatdoesnotinsulateyouwhenworkingwithlive

electricalcurrents.

Manycustomershaverubberfloormatsneartheirmachinesthatcontainsmall

conductiveberstodecreaseelectrostaticdischarges.Donotusesuchkindofmat

toprotectyourselffromelectricalshock.

• Find the room emergency power-off (EPO) switch, disconnecting switch or

electrical outlet. If an electrical accident occurs, you can then operate the

switch or unplug the power cord quickly.

• Do not work alone under hazardous conditions or near the equipment that

has hazardous voltages.

• Disconnect all power before:

– Performing a mechanical inspection

– Working near power supplies

– Removing or installing main units

• Before you start to work on the machine, unplug the power cord. If you

cannot unplug it, ask the customer to power-off the wall box that supplies

power to the machine, and to lock the wall box in the off position.

• If you need to work on a machine that has exposed electrical circuits,

observe the following precautions:

– Ensure that another person, familiar with the power-off controls, is near

you.

Attention: Another person must be there to switch off the power, if

necessary.

– Use only one hand when working with powered-on electrical equipment;

keep the other hand in your pocket or behind your back.

Attention: An electrical shock can occur only when there is a complete

circuit. By observing the above rule, you may prevent a current from

passing through your body.

– When using testers, set the controls correctly and use the approved

probe leads and accessories for that tester.

– Stand on suitable rubber mats (obtained locally, if necessary) to insulate

you from grounds such as metal oor strips and machine frames.

Observe the special safety precautions when you work with very high voltages;

instructions for these precautions are in the safety sections of maintenance

information. Be extremely careful when you measure the high voltages.

• Regularly inspect and maintain your electrical hand tools for safe operational

condition.

• Do not use worn or broken tools and testers.

• Never assume that power has been disconnected from a circuit. First, check

it to make sure that it has been powered off.

1 2 3 4 5 6 7 8 9 10 11 12 ... 75 76

Kommentare zu diesen Handbüchern

Keine Kommentare

Lenovo 59404953 Datenblatt Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Notebooks Lenovo 59404953