Lenovo THINKCENTRE 6396 Bedienungsanleitung PDF herunterladen (Seite 67)

Diagnostic Error Code FRU/Action

015-000-XXX

USB port Interface Test Passed

No action

015-001-XXX

USB port Presence

1. Remove USB device(s) and re-test

2. System board

015-002-XXX

USB port Timeout

1. Remove USB device(s) and re-test

2. System board

015-015-XXX

USB port External Loopback failure

1. Remove USB device(s) and re-test

2. System board

015-027-XXX

USB port Configuration/Setup error

1. Flash the system. See “Updating

(flashing) BIOS from a CD-ROM or

diskette” on page 152

2. System board

015-032-XXX

USB port Device Controller failure

System board

015-034-XXX

USB port buffer

allocation failure

1. Reboot the system

2. Flash the system and re-test. See

“Updating (flashing) BIOS from a

CD-ROM or diskette” on page 152

3. Run memory test

4. System board

015-035-XXX

USB port Reset condition detected

1. Remove USB device(s) and re-test

2. System board

015-036-XXX

USB port Register error

System board

015-040-XXX

USB port IRQ failure

1. Run setup and check for conflicts

2. Flash the system. See “Updating

(flashing) BIOS from a CD-ROM or

diskette” on page 152

3. System board

015-195-XXX

USB port Test aborted by user

Information only

Re-start the test, if necessary

015-196-XXX

USB port test halt, error threshold exceeded

1. Press F3 to review the log file

2. Re-start the test to reset the log file

015-197-XXX

USB port test warning

1. Make sure the component that is called

out is connected and/or enabled. See

Chapter 6, “Using the Setup Utility,” on

page 49

2. Re-run test

3. Replace the component that is called out

in warning statement

4. Replace the component under test

Chapter 7. Symptom-to-FRU Index 61

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 163 164

Kommentare zu diesen Handbüchern

Keine Kommentare