Lenovo ThinkCentre 41N5583 Bedienungsanleitung Seite 38

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 72
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 37
8. Select CD-ROM from the list that is displayed in the Device Manager window. Verify that a
CD-ROM device is present in the list and that no conflicts exist. The device status indicates
whether the device is working properly.
9. Click OK.
10. Close all windows and restart the computer.
If the device icon is still not present, check cable connections and device-jumper settings, and resolve
any conflicts that might exist.
v The drive is not recognized by the operating system, or the drive performs erratically.
Some computers have Compatible and High Performance modes for mass storage devices. Normally,
the drive functions better under the High Performance mode. However, if your drive is not functioning
properly in that mode, you might need to use the Compatible mode.
Use the following procedure to check the configuration-setup information for your computer.
1. Access your configuration utility program.
2. Select Devices.
3. Scroll down to the Mass Storage Devices section.
Refer to the documentation that comes with your computer for additional details on selecting IDE
performance modes.
v The disc cannot be read.
Take the following actions:
1. The disc might be dirty; clean it as described in “Handling and caring for a disc” on page 3-3.
2. The disc might be defective; try another disc.
3. The disc is not ISO-9660, High Sierra Group (HSG), or Universal Disc Format (UDF) compatible.
Check with your place of purchase.
v
DVD-R DL media cannot be read in other computers after burning.
Take the following actions:
1. Check with your manufacturer to be sure that the drive can read DVD+R DL and DVD-R DL
media.
2. Follow this procedure to enable IMAPI for Windows XP:
a. Double-click My Computer.
b. Right Click on the DVD reader drive, and select Properties.
c. Click Recording.
d. Mark the Enable CD Recording on this drive checkbox.
e. Click Apply.
3.
Try installing the UDF reader in the other computer.
v There is no sound from the disc.
1. Check that you are not using a data CD.
2. Adjust the audio-adapter volume control. See the documentation that comes with your audio
adapter and audio-CD player program.
3. Enable digital audio extraction. For more information, see “Enabling digital audio extraction for
Windows 2000” on page C-2
v You receive an error message.
Take the following actions for these common error messages:
CDR-103
The disc in the Multi-Burner Plus is not High Sierra, ISO 9660, or UDF format.
The Multi-Burner Plus does not support the media.
CDR-101
B-2 Multi-Burner Plus User’s Guide
Seitenansicht 37
1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 71 72

Kommentare zu diesen Handbüchern

Keine Kommentare