Lenovo THINKSERVER TS100 6434 Bedienungsanleitung PDF herunterladen (Seite 78)

Diskette drive problems

v Follow the suggested actions in the order in which they are listed in the Action column until the problem is

solved.

v See the parts listing in the Hardware Maintenance Manual to determine which components are customer

replaceable units (CRU) and which components are field replaceable units (FRU).

v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a

trained service technician.

Symptom Action

The diskette drive activity LED

stays lit, or the server bypasses

the diskette drive.

v If there is a diskette in the drive, make sure that:

– The diskette drive cables are correctly and securely connected.

– The diskette drive is enabled in the Configuration/Setup Utility program.

– The diskette is good and not damaged. (Try another diskette if you have

one.)

– The diskette is inserted correctly in the drive.

– The diskette contains the necessary files to start the server.

– Your software program is working properly.

v

To prevent diskette drive read/write errors, make sure that the distance

between monitors and diskette drives is at least 76 mm (3 in.).

v Replace the diskette drive.

General problems

v Follow the suggested actions in the order in which they are listed in the Action column until the problem is

solved.

v See the parts listing in the Hardware Maintenance Manual to determine which components are customer

replaceable units (CRU) and which components are field replaceable units (FRU).

v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a

trained service technician.

Symptom Action

A cover lock is broken, an LED

is not working, or a similar

problem has occurred.

If the part is a CRU, replace it. If the part is a FRU, the part must be replaced by a

trained service technician.

Hard disk drive problems

v Follow the suggested actions in the order in which they are listed in the Action column until the problem is

solved.

v See the parts listing in the Hardware Maintenance Manual to determine which components are customer

replaceable units (CRU) and which components are field replaceable units (FRU).

v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a

trained service technician.

Symptom Action

Not all drives are recognized by

the hard disk drive diagnostic

test (the Fixed Disk Test or the

SCSI Attached Disk test).

Remove the drive that is indicated by the diagnostic tests; then, run the hard disk

drive diagnostic test again. If the remaining drives are recognized, replace the

drive that you removed with a new one.

The server stops responding

during the hard disk drive

diagnostic test.

Remove the hard disk drive that was being tested when the server stopped

responding, and run the diagnostic test again. If the hard disk drive diagnostic

test runs successfully, replace the drive that you removed with a new one.

64 ThinkServer TS100 Types 6431, 6432, 6433, 6434: Installation Guide

Lenovo THINKSERVER TS100 6434 Bedienungsanleitung Seite 78

Kommentare zu diesen Handbüchern

Lenovo THINKSERVER TS100 6434 Bedienungsanleitung Seite 78

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computers Lenovo THINKSERVER TS100 6434