Lenovo THINKSERVER TS100 6434 Bedienungsanleitung PDF herunterladen (Seite 71)

Table 11. Abbreviated list of POST error codes (continued)

v Follow the suggested actions in the order in which they are listed in the Action column until the problem is

solved.

v See the parts listing in the Hardware Maintenance Manual to determine which components are customer

replaceable units (CRU) and which components are field replaceable units (FRU).

v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a

trained service technician.

Error code Description Action

178x Fixed disk error.

Note: x is the drive that has the error.

1. Run the hard disk drive diagnostic tests

on drive x (see “Running the diagnostic

programs” in the Hardware Maintenance

Manual ).

2. Reseat the following components,

depending on the server model:

v Hot-swap models: Hard disk drive

v Simple-swap models:

a. Hard disk drive x

b. Hard disk drive x cable

Replace the following components one at

a time, depending on the server model,

in the order shown, restarting the server

each time:

v Hot-swap models:

a. Hard disk drive x

b. Hard disk drive backplane

Simple-swap models:

a. Hard disk drive x

b. Hard disk drive x cable

(Trained service technician only) Replace

the system board.

1800 Unavailable PCI hardware interrupt.

1. Run the Configuration/Setup Utility

program and adjust the adapter settings.

2. Remove each adapter one at a time,

restarting the server each time, until the

failing adapter is isolated.

Chapter 5. Solving problems 57

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 109 110

Keine Kommentare

Lenovo THINKSERVER TS100 6434 Bedienungsanleitung Seite 71