Lenovo THINKSERVER TS100 6434 Bedienungsanleitung PDF herunterladen (Seite 69)

Table 11. Abbreviated list of POST error codes (continued)

v Follow the suggested actions in the order in which they are listed in the Action column until the problem is

solved.

v See the parts listing in the Hardware Maintenance Manual to determine which components are customer

replaceable units (CRU) and which components are field replaceable units (FRU).

v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a

trained service technician.

Error code Description Action

188 Service processor firmware corrupted or not

installed.

1. Restart the server.

2. Run the Configuration/Setup Utility

program, select Load Default Settings,

and save the settings.

3. Update the Remote Supervisor Adapter

II SlimLine firmware (see the

instructions that are included with the

adapter).

4. (Trained service technician only) Replace

the system board.

189 Three attempts were made to access the

server with an incorrect password.

Restart the server and enter the

administrator password; then, run the

Configuration/Setup Utility program and

change the power-on password.

289 A DIMM has been disabled by the system.

1. Make sure that the DIMM is installed

correctly (see “Installing a memory

module” on page 13).

2. Replace the DIMM.

3. (Trained service technician only) Replace

the system board.

602 Invalid diskette boot record

1. Replace the diskette.

2. Reseat the diskette drive cables.

3. Replace the diskette drive.

604 Internal diskette drive error

1. Run the Configuration/Setup Utility

program, select Load Default Settings,

and save the settings.

2. Reseat the diskette drive signal cables.

3. Replace the diskette drive.

962 Parallel port configuration error

1. Run the Configuration/Setup Utility

program and make sure that the parallel

port setting is correct.

2. (Trained service technician only) Replace

the system board.

1162 Serial port error

1. Run the Configuration/Setup Utility

program and make sure that the serial

port settings are correct.

2. (Trained service technician only) Replace

the system board.

1600 The service processor is not functioning. (Trained service technician only) Replace the

system board.

Chapter 5. Solving problems 55

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 109 110

Kommentare zu diesen Handbüchern

Keine Kommentare

Lenovo THINKSERVER TS100 6434 Bedienungsanleitung Seite 69

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computers Lenovo THINKSERVER TS100 6434