Lenovo THINKSERVER TS100 6434 Bedienungsanleitung PDF herunterladen (Seite 46)

Reinstalling the side cover

If you removed the bezel, reinstall it before you reinstall the side cover. See

“Reinstalling the two-piece bezel” on page 30.

Note: The rear adapter-retention bracket rests against the server side cover. You

might find it easier to lay the server on its side to reinstall the side cover.

To reinstall the side cover, complete the following steps:

1. Before you install the side cover, make sure that all cables, adapters, and other

components are installed and seated correctly and that you have not left loose

tools or parts inside the server. Also, make sure that all internal cables are

correctly routed.

Note: The cover-release latch 1 must be in the unlocked (opened) position

before you install the side cover.

2. Position the lip on the bottom edge of the side cover on the ledge on the

bottom of the chassis; then, rotate the cover up to the chassis, and then press

down on the cover release latch and push the cover completely closed until it

latches securely into place.

3. Close the cover-release latch to secure the side cover in place.

4. Lock the side cover.

32 ThinkServer TS100 Types 6431, 6432, 6433, 6434: Installation Guide

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 109 110

Keine Kommentare

Lenovo THINKSERVER TS100 6434 Bedienungsanleitung Seite 46