Lenovo THINKSERVER TS100 6434 Bedienungsanleitung PDF herunterladen (Seite 42)

Attention: Static electricity that is released to internal server components when

the server is powered-on might cause the server to stop, which might result in the

loss of data. To avoid this potential problem, always use an electrostatic-discharge

wrist strap or other grounding system when you work inside the server with the

power on.

To install an adapter, complete the following steps:

1. Read the safety information that begins on page v and “Installation

guidelines” on page 7.

2. Turn off the server and peripheral devices and disconnect all external cables

and power cords; then, remove the side cover. See “Removing the side cover”

on page 10.

3. Follow the cabling instructions, if any, that come with the adapter. Route the

adapter cables before you install the adapter.

4. Follow the instructions that come with the adapter to set jumpers or switches,

if any.

5. Rotate the rear adapter-retention bracket to the open (unlocked) position and

remove it from the server.

6. Remove the screw that secures the expansion-slot cover to the chassis. Store

the expansion-slot cover and screw in a safe place for future use.

Note: Expansion-slot covers must be installed on all vacant slots. This

maintains the electronic emissions standards of the server and ensures

proper ventilation of server components.

7. Touch the static-protective package that contains the adapter to any unpainted

metal surface on the server. Then, remove the adapter from the

static-protective package. Avoid touching the components and gold-edge

connectors on the adapter.

8. If you are installing a full-length adapter, remove the blue adapter guide 1

(if any) from the end of the adapter.

9. Carefully grasp the adapter by the top edge or upper corners, and align it

with the expansion-slot guides; then, press the adapter firmly into the

expansion slot. Move the adapter directly from the static-protective package to

the expansion slot.

Attention: Make sure that the adapter is correctly seated in the expansion

slot before you turn on the server. Incomplete installation of an adapter might

damage the system board or the adapter.

28 ThinkServer TS100 Types 6431, 6432, 6433, 6434: Installation Guide

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 109 110

Keine Kommentare

Lenovo THINKSERVER TS100 6434 Bedienungsanleitung Seite 42