Lenovo THINKSERVER TS100 6434 Bedienungsanleitung PDF herunterladen (Seite 37)

Table 6. Illustrations of the server models with four and eight drive bays

Server model with four hot-swap drive

bays

Server model with eight hot-swap drive

bays

1 Drive-tray assembly

2Drive tray handle (in open position)

1 Drive-tray assembly

2Drive tray handle (in open position)

c. Gently push the drive assembly into the bay until the drive stops.

d. Rotate the drive tray handle to the closed (locked) position.

e. Check the hard disk drive status indicator to make sure that the hard disk

drive is operating correctly. (You might have to restart the server before the

drive is recognized.) If the amber hard disk drive status LED for a drive is

lit continuously, it indicates that the drive is faulty and must be replaced. If

the green hard disk drive activity LED is flashing, it indicates that the drive

is being accessed.

Note: If the server is configured for RAID operation using an optional

ServeRAID adapter, you might have to reconfigure your disk arrays

after you install hard disk drives. See the adapter documentation on

the IBM

ServeRAID Support CD for additional information about

RAID operation for your adapter.

If you are installing additional hot-swap hard disk drives, do so now.

you have other devices to install or remove, do so now; otherwise go to

“Completing the installation” on page 30.

IDs for hot-swap hard disk drives

On some models, the hot-swap-drive backplane controls the IDs of the internal

hot-swap drive bays. The following table lists the IDs of the hard disk drives and

backplane that are connected to one channel in the hot-swap models. In the typical

configuration, the standard hard disk drives and backplane are connected to

channel A. This table applies only to server models that support four hot-swap

hard disk drives.

Table 7. Drive bay IDs for hot-swap SAS/SATA models with four drive bays

Drive bay ID

4 0

Chapter 2. Installing optional devices 23

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 109 110

Keine Kommentare

Lenovo THINKSERVER TS100 6434 Bedienungsanleitung Seite 37