Lenovo THINKSERVER TS100 6434 Bedienungsanleitung Seite 31

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 110
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 30
Installing a drive
Depending on the server model, a DVD-ROM or multiburner drive might be
installed in the server. The server supports 2.5-inch and 3.5-inch hot-swap SAS or
hot-swap SATA hard disk drives and 3.5-inch simple-swap SATA hard disk drives
(depending on the model).
The following illustrations show the locations of the drive bays. Some models have
seven drive bays1 to 7, and some models have eleven drive bays 1 to 11.
Table 5. Drive bays on the server models
Seven drive-bay model Eleven drive-bay model
The following notes describe the types of drives that the server supports and other
information that you must consider when you install a drive:
v Make sure that you have all the cables and other equipment specified that are in
the documentation that comes with the drive.
v Select the bay in which you want to install the drive.
v Check the instructions that come with the drive to determine whether you have
to set any switches or jumpers on the drive. If you are installing a SAS or SATA
device, be sure to set the SAS or SATA ID for that device.
v Optional internal or external USB diskette drives, tape drives, DVD-ROM, and
multiburner drives are examples of removable-media drives. You can install
removable-media drives in bays 1, 2, and 3 only.
v The SATA removable-media drives that you install in bay 1 connects to the
SATA 4 connector on the system board and the drive in bay 2 connects to the
SATA 5 connector on the system board.
v To install a 3.5-inch drive in a 5.25-inch bay, you must use the 5.25-inch
conversion kit.
Chapter 2. Installing optional devices 17
Seitenansicht 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 109 110

Kommentare zu diesen Handbüchern

Keine Kommentare