Lenovo THINKSERVER RS210 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Computers Lenovo THINKSERVER RS210 herunter. Lenovo THINKSERVER RS210 User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 244
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen

Inhaltsverzeichnis

Seite 1 - Hardware Maintenance Manual

Hardware Maintenance ManualThinkServer RS210Machine Types: 6531, 6532, 6533, and 6534

Seite 2

Safety statementsImportant:Each caution and danger statement in this document is labeled with a number. This number is used tocross reference an Engli

Seite 3 - 6533, and 6534

Table 5. DSA Preboot messages (continued)v Follow the suggested actions in the order in which they are listed in the Action column until the problem i

Seite 4

Table 5. DSA Preboot messages (continued)v Follow the suggested actions in the order in which they are listed in the Action column until the problem i

Seite 5 - Contents

Table 5. DSA Preboot messages (continued)v Follow the suggested actions in the order in which they are listed in the Action column until the problem i

Seite 6

Table 5. DSA Preboot messages (continued)v Follow the suggested actions in the order in which they are listed in the Action column until the problem i

Seite 7 - Contents v

Table 5. DSA Preboot messages (continued)v Follow the suggested actions in the order in which they are listed in the Action column until the problem i

Seite 8

Table 5. DSA Preboot messages (continued)v Follow the suggested actions in the order in which they are listed in the Action column until the problem i

Seite 9 - Chapter 1. About this manual

Table 5. DSA Preboot messages (continued)v Follow the suggested actions in the order in which they are listed in the Action column until the problem i

Seite 10 - Safety statements

Table 5. DSA Preboot messages (continued)v Follow the suggested actions in the order in which they are listed in the Action column until the problem i

Seite 11

Recovering the server firmwareImportant: Some cluster solutions require specific code levels or coordinated code updates. If the deviceis part of a cl

Seite 12

Boot blockjumper (JP6)Clear CMOSjumper (JP1)4. Move the jumper from pins 1 and 2 to pins 2 and 3 to enable the UEFI recovery mode.5. Reinstall the ser

Seite 13

Statement 1:DANGERElectrical current from power, telephone, and communication cables is hazardous.To avoid a shock hazard:v Do not connect or disconne

Seite 14

Automated boot recovery (ABR)If the server is booting up and the IMM detect problems with the server firmware in the primary bank, itwill automaticall

Seite 15

– If you directly connect two servers (without a hub), or if you are not using a hub with X ports, usea crossover cable. To determine whether a hub ha

Seite 16

Problem determination tipsBecause of the variety of hardware and software combinations that can encounter, use the followinginformation to assist you

Seite 17 - Features and technologies

Chapter 5. Locating Server Controls and connectorsThis section describes the controls, light-emitting diodes (LEDs), and connectors on the front and r

Seite 18

Rear view1 Power-cord connector 9 NMI button2 Serial connector 10 USB 3-4 connector3 Ethernet 1 activity LED 11 USB 1-2 connector4 Ether

Seite 19 - Specifications

System-board internal connectorsThe following illustration shows the internal connectors on the system board.MicroprocessorHeatsinkOrientationDIMMsDIM

Seite 20 - EasyStartup

System-board external connectorsThe following illustration shows the external connectors on the system-board.MicroprocessorHeatsinkOrientationDIMMsDIM

Seite 21 - EasyManage

System-board optional-device connectorsThe following illustration shows the connectors on the system board for user-installable optional devices.Micro

Seite 22

The following illustration shows the location of the PCI-X slot on the optional PCI-X riser-card assembly.1 PCI-X power cable 2 PCI-X slot110 Thin

Seite 23 - Chapter 3. General Checkout

System-board switches and jumpersThe following illustration shows the switches and jumpers on the system board.MicroprocessorHeatsinkOrientationDIMMsD

Seite 24 - Diagnosing a problem

Statement 2:CAUTION:When replacing the lithium battery, use only a type battery recommended by the manufacturer. If yoursystem has a module containing

Seite 25

System-board LEDsThe following illustration shows the light-emitting diodes (LEDs) on the system board.HeatsinkOrientationDIMMsDIMMs1 Fan 5 error LE

Seite 26 - Undocumented problems

Server power featuresWhen the server is connected to an ac power source but is not turned on, the operating system does notrun, and all core logic exc

Seite 27 - Chapter 4. Diagnostics

Statement 5:CAUTION:The power control button on the device and the power switch on the power supply do not turn off theelectrical current supplied to

Seite 28

Chapter 6. Replacing FRUsGuidelines for trained service techniciansThis section contains information for trained service technicians.Inspecting for un

Seite 29 - POST error codes

v Do not touch the reflective surface of a dental mirror to a live electrical circuit. The surface isconductive and can cause personal injury or equip

Seite 30

Handling static-sensitive devicesAttention: Static electricity can damage the server and other electronic devices. To avoid damage, keepstatic-sensiti

Seite 31 - Chapter 4. Diagnostics 23

Major components of the serverThe following illustrations show the major components in the server. The illustrations in this documentmight differ slig

Seite 32

Removing and installing the coverUse the following procedures to remove and install the cover:Removing the coverTo remove the server cover, do the fol

Seite 33 - Chapter 4. Diagnostics 25

Removing and installing the bezelTo remove the bezel, complete the following steps:1. Remove the server from the rack and remove the cover (see “Remov

Seite 34

Attention: For proper cooling and airflow, replace the bezel and server cover before you turn on theserver.To install the bezel, insert the tab at the

Seite 35 - Chapter 4. Diagnostics 27

Statement 3:CAUTION:When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or transmitters) areinstalled, note the following:v Do not

Seite 36

Replacing a memory module (DIMM)To replace a dual inline memory module (DIMM), use the following information and procedures:Supported memory typesFoll

Seite 37 - System-event log

Unbuffered DIMMs (UDIMMs)The following notes provide information that you must configure when you install UDIMMs:v The memory channels run at the fast

Seite 38

v The following table lists the supported RDIMM population.Table 11. Supported RDIMM population per channelDIMM connectorsper channelDIMMs installed i

Seite 39 - Chapter 4. Diagnostics 31

Attention: To ensure proper cooling and airflow, do not operate the server for more than 30 minuteswith the cover removed.4. Remove the DIMM air baffl

Seite 40

6. Touch the static-protective package that contains the DIMM to any unpainted metal surface on theoutside of the server. Then, remove the DIMM from t

Seite 41 - Chapter 4. Diagnostics 33

2. Make sure that the server cover is in place and fully closed.3. Turn off the server and peripheral devices, and disconnect the power cord and all e

Seite 42

6. Release the loops of the drive tray.7. Insert the filler panel into the bay to cover the drive.Note: If the server is configured for RAID operation

Seite 43 - Chapter 4. Diagnostics 35

3. Grasp the handle and pull the hot-swap drive assembly 2 out of the drive bay.Installing a hot-swap hard disk driveTo install a hot-swap hard disk

Seite 44

c. Gently push the drive assembly into the bay until the drive stops.d. Push the tray handle 2 to the closed (locked) position.e. Check the hard dis

Seite 45 - Chapter 4. Diagnostics 37

1 PCI-X power cable 2 PCI-X slot7. Grasp the riser-card assembly at the front grip point and rear edges and lift to remove it from theserver.8. Pl

Seite 46

Statement 4:≥ 18 kg (39.7 lb) ≥ 32 kg (70.5 lb) ≥ 55 kg (121.2 lb)CAUTION:Use safe practices when lifting.Statement 5:CAUTION:The power control button

Seite 47 - Chapter 4. Diagnostics 39

Installing a PCI cardTo install a PCI card, complete the following steps:1. Read the safety information in “Important Safety Information” on page 1 an

Seite 48

6. Follow the instructions that come with the PCI card to set any jumpers or switches.Attention: When you install an PCI card, make sure that it is co

Seite 49 - Chapter 4. Diagnostics 41

2. Turn off the server and peripheral devices and disconnect the power cords.3. Remove the cover (see “Removing and installing the cover” on page 119)

Seite 50

6. Lift the operator information panel assembly out of the server.7. If you are instructed to return the operator information panel assembly, follow a

Seite 51 - Chapter 4. Diagnostics 43

Replacing the drive cageTo replace the drive cage, use the following procedures:Removing the drive cageThe following illustration shows removing a sim

Seite 52

To remove a drive cage, complete the following steps:1. Read the safety information in “Important Safety Information” on page 1 and “Guidelines for tr

Seite 53 - Chapter 4. Diagnostics 45

Installing the drive cageThe following illustration shows installing a simple-swap 3.5-inch drive cage.The following illustration shows installing a h

Seite 54

To install a drive cage, complete the following steps:1. Make sure that the backplane or back plate is removed from the drive cage. (See “Removing the

Seite 55 - Chapter 4. Diagnostics 47

http://www.lenovo.com/support.v The microprocessor uses an integrated voltage regulator on the system board.Removing the microprocessorTo remove the m

Seite 56

9. Remove the microprocessor:a. Carefully lift the microprocessor 1 straight up and out of the socket, without touching themicroprocessor contacts.b

Seite 57 - Chapter 4. Diagnostics 49

Statement 8:CAUTION:Never remove the cover on a power supply or any part that has the following label attached.Hazardous voltage, current, and energy

Seite 58 - EasyStartup problems

4. Gently lower the heat sink on the microprocessor.5. Install the heat sink on the microprocessor.Attention: Do not touch the thermal material on the

Seite 59 - DVD drive problems

6. Go to “Completing the FRU replacement” on page 173.Thermal greaseThe thermal grease must be replaced whenever the heat sink has been removed from t

Seite 60 - Hard disk drive problems

5. Use the thermal-grease syringe to place 9 uniformly spaced dots 1 of 0.02 mL each on the top of themicroprocessor 2. Make sure that the outermo

Seite 61 - Chapter 4. Diagnostics 53

8. Remove the memory modules and set them aside on a static-protective surface for reinstallation (see“Replacing a memory module (DIMM)” on page 122).

Seite 62 - Hypervisor problems

“Updating the firmware” on page 212“Updating the Universal Unique Identifier (UUID)” on page169“Updating the DMI/SMBIOS data” on page 171 for more inf

Seite 63 - Intermittent problems

12Statement 8:CAUTION:Never remove the cover on a power supply or any part that has the following label attached.Hazardous voltage, current, and energ

Seite 64

7. Loosen the captive thumbscrew 3 that secures the power supply to the chassis bottom.8. Lift the power supply out of the bay.9. If you are instruc

Seite 65 - Memory problems

9. Connect the cables from the power supply to the internal devices.10. Install the DIMM air baffle (see “Removing and installing the DIMM air baffle”

Seite 66 - Microprocessor problems

Table 14. Removing the fan1 Fan 1 4 Fan 42 Fan 2 5 Fan 53 Fan 39. If you are instructed to return the fan, follow all packaging instructions

Seite 67 - Monitor problems

b. In the location from which you removed the failed fan, route the fan cable into its slot 2 in thefan bracket top.c. Insert the fan 4 into the b

Seite 68

RoHS compliant ThinkServer RS210 parts have unique FRU part numbers. Before or after June, 2006,failed RoHS compliant parts must always be replaced us

Seite 69 - Optional-device problems

MicroprocessorHeatsinkOrientationDIMMsDIMMsa. Use a fingernail to press the top of the battery clip away from the battery. The battery pops upwhen rel

Seite 70 - Power problems

CAUTION:When replacing the lithium battery, use only an equivalent type battery recommended by themanufacturer. If your system has a module containing

Seite 71 - Serial-device problems

v Set the power-on password.v Reconfigure the server.Replacing the SAS/SATA hard disk drive back plate or backplaneTo replace the SAS/SATA hard disk d

Seite 72 - Software problems

Note: The following illustration shows installing the hot-swap SAS/SATA backplane.1 Connectors2 Guide channels1. Connect the power cable to the re

Seite 73 - Error LEDs

Removing the SAS backplane (2.5-inch drives)1 Alignment tabs 3 Alignment slots2 Connectors 4 ConnectorsTo remove the 2.5-inch drives backplane

Seite 74

Installing the SAS backplane (2.5-inch drives)To install the replacement 2.5-inch hot-swap drives backplane, complete the following steps.1 Alignmen

Seite 75 - System pulse LEDs

6. If the riser-card assembly is an optional PCI-X riser-card assembly, disconnect the riser-card powercable 1 from the riser-card assembly.7. Disco

Seite 76

5. Carefully align the riser-card assembly with the guides on the rear of the server and with theriser-card connectors on the system board; then, pres

Seite 77 - Viewing the test log

6. Disconnect the signal cables that are attached to the SAS/SATA controller.7. Grasp the SAS/SATA controller 1 while you press outward on the plast

Seite 78 - Diagnostic messages

4. Remove the cover (see “Removing and installing the cover” on page 119).5. Remove the riser-card assembly (see “Removing the riser-card assembly” on

Seite 79

Chapter 2. General informationThis chapter provides general information that applies to all machine types supported by this publication.Features and t

Seite 80

10. Connect the signal cable that is attached to the drive backplane 1 to the ServeRAID controllerconnector 2.11. Replace the riser-card assembly

Seite 81

7. Remove the cable from the DVD drive cage connector.8. Disconnect the DVD drive power cable from the power supply cable.9. If you are instructed to

Seite 82

Note: Route the DVD drive cable 2 through the fan cage hole on the left of fan 1.5. Connect the DVD drive cable to the system board connector 1.6.

Seite 83

5. Remove the retention clip 1 from the drive and save for future use.6. If you are instructed to return the DVD drive, follow all packaging instruc

Seite 84

6. Attach the drive-retention clip 1 that you removed from the failing drive to the side of the newDVD drive.Note: If you are installing a drive tha

Seite 85

Replacing the virtual media keyTo replace the virtual media key, complete the following procedures:Removing the virtual media keyTo remove the virtual

Seite 86

MicroprocessorHeatsinkOrientationDIMMsDIMMs4. Go to “Completing the FRU replacement” on page 173.Replacing the PCI-X riser-card power cableTo replace

Seite 87

7. Disconnect the riser-card power cable from the PCI-X riser card.8. If you are instructed to return the PCI-X riser-card power cable, follow all pac

Seite 88

v For Windows based operating systems:– ibm_rndis_server_os.inf– device.catv For Linux based operating systems:– cdc_interface.sh4. After you install

Seite 89

e. Click User’s guides and manuals to link to the ASU Users Guide.v Remote LAN access, type the command:Note: When using the remote LAN access method

Seite 90

The memory bus supports up to 24 GB of memory when registered DIMMs are installed. The serversupports up to 8 GB if unbuffered DIMMs are installed. Th

Seite 91

4. After you install ASU, Type the following commands to set the DMI:asu set SYSTEM_PROD_DATA.SysInfoProdName <m/t_model> [access_method]asu set

Seite 92

a. Go to http://www.lenovo.com/support.b. Enter your product number (machine type and model number) or select Servers and Storagefrom the Select your

Seite 93

5. Update the server configuration (see “Updating the server configuration” on page 175).6. Slide the server back into the rack, if necessary.7. Turn

Seite 94

The following illustration shows the connectors and LEDs on the rear of the server.1 Power-cord connector 9 NMI button2 Serial connector 10 US

Seite 95

176 ThinkServer ThinkServer RS210, Types 6531, 6532, 6533, and 6534: Hardware Maintenance Manual

Seite 96

Chapter 7. Parts listing, RS210 Types 6531, 6532, 6533, and6534The following replaceable components are available for the ThinkServer RS210 Types 6531

Seite 97

1 Riser card assembly 12 Bezel2 DIMM air baffle 13 DVD drive filler3 DIMM 14 Operator information panel4 Power supply 15 Fans5 SAS/S

Seite 98

Replaceable server componentsReplaceable components are of three types:v Self-service customer replaceable unit (CRU): Replacement of self-service CRU

Seite 99

Table 15. Parts listing, Types 6531 (continued)Index DescriptionCRU partnumber(Tier 1)CRU partnumber(Tier 2)FRU partnumber11 Hard disk drive, 146GB 15

Seite 100

Table 15. Parts listing, Types 6531 (continued)Index DescriptionCRU partnumber(Tier 1)CRU partnumber(Tier 2)FRU partnumber18 Heat Sink (models CTO All

Seite 101

– Event logs for RAID controllers and service processorsThe diagnostics programs create a merged log that includes events from all collected logs. The

Seite 102

6531 Software FRU FRU#EasyManage (models CTO All Models) 69Y9937Documentation DVD (models CTO All Models) 90Y1164EasyStartup (models CTO All Models) 9

Seite 103

Table 16. Parts listing, Types 6532Index DescriptionCRU partnumber(Tier 1)CRU partnumber(Tier 2)FRU partnumber1 Riser PCIX (models CTO All Models) 49Y

Seite 104

Table 16. Parts listing, Types 6532 (continued)Index DescriptionCRU partnumber(Tier 1)CRU partnumber(Tier 2)FRU partnumber11 IBM 146GB 15K 6Gbps SAS 2

Seite 105

Table 16. Parts listing, Types 6532 (continued)Index DescriptionCRU partnumber(Tier 1)CRU partnumber(Tier 2)FRU partnumberBlank EMC shield (models CTO

Seite 106

6532 Software FRU FRU#WS2008 R2 FOUND 64bit JP (models CTO All Models) 90Y1171WS2008 R2 FOUND 64bit SP (models CTO All Models) 90Y1172WS2008 R2 FOUND

Seite 107

Table 17. Parts listing, Types 6533 (continued)Index DescriptionCRU partnumber(Tier 1)CRU partnumber(Tier 2)FRU partnumber3 Memory module, 1GB (1x1GB,

Seite 108

Table 17. Parts listing, Types 6533 (continued)Index DescriptionCRU partnumber(Tier 1)CRU partnumber(Tier 2)FRU partnumber17 Microprocessor, Core i3-5

Seite 109 - Clear CMOS

Table 17. Parts listing, Types 6533 (continued)Index DescriptionCRU partnumber(Tier 1)CRU partnumber(Tier 2)FRU partnumberServeRAID-MR10M SAS/SATA con

Seite 110 - Solving power problems

6533 Software FRU FRU#WS 2008 R2 ENT 64bit JP (models CTO All Models) 90Y1196WS 2008 R2 ENT 64bit SP (models CTO All Models) 90Y1197WS 2008 R2 ENT 64b

Seite 111 - Solving undetermined problems

Table 18. Parts listing, Types 6534 (continued)Index DescriptionCRU partnumber(Tier 1)CRU partnumber(Tier 2)FRU partnumber11 Hard disk drive, 146GB 15

Seite 113 - Front view

Table 1. Features and specifications (continued)RAID controllers:v An IBM ServeRAID-BR10il SAS/SATAController that provides RAID levels 0,1, and 1E (c

Seite 114 - Rear view

Table 18. Parts listing, Types 6534 (continued)Index DescriptionCRU partnumber(Tier 1)CRU partnumber(Tier 2)FRU partnumber17 Microprocessor, Xeon X345

Seite 115 - Orientation

Table 18. Parts listing, Types 6534 (continued)Index DescriptionCRU partnumber(Tier 1)CRU partnumber(Tier 2)FRU partnumberServeRAID-MR10is VAULT SAS/S

Seite 116

6534 Software FRU FRU#WS 2008 R2 STD 64bit GR (models CTO All Models) 90Y1185WS 2008 R2 STD 64bit JP (models CTO All Models) 90Y1186WS 2008 R2 STD 64b

Seite 117

Table 19. Power cords, Type 6531Lenovo Power cord partnumber Used in these countries and regions39M5247 Taiwan 2.8M (models CTO)39M5102 ANZ 2.8M (mode

Seite 118

Table 21. Power cords, Type 6533Lenovo Power cord partnumber Used in these countries and regions39M5247 Taiwan 2.8M (models CTO)39M5102 ANZ 2.8M (mode

Seite 119

Table 22. Power cords, Type 6534 (continued)Lenovo Power cord partnumber Used in these countries and regions39M5206 China 2.8M (models CTO)Chapter 7.

Seite 120

198 ThinkServer ThinkServer RS210, Types 6531, 6532, 6533, and 6534: Hardware Maintenance Manual

Seite 121 - Turning off the server

Chapter 8. Configuring the serverThe following configuration programs come with the server:v Setup Utility programThe Setup Utility program is part of

Seite 122

Using the Setup UtilityThe Setup Utility program is part of the UEFI. You can use it to perform the following tasks:v View configuration informationv

Seite 123 - Chapter 6. Replacing FRUs

– Devices and I/O PortsSelect this choice to view or change assignments for devices and input/output (I/O) ports. You canconfigure the serial ports; c

Seite 124

EasyManageThe ThinkServer EasyManage Core server provides centralized hardware and software inventorymanagement and secure automated system management

Seite 125 - Chapter 6. Replacing FRUs 117

Note: The configuration forms for UEFI 2.1 and greater compliant add-on network devices might belocated here.v Date and TimeSelect this choice to set

Seite 126

Select this choice to save the changes that you have made in the settings.v Restore SettingsSelect this choice to cancel the changes that you have mad

Seite 127 - Installing the cover

Attention: Before you change any switch settings or move any jumpers, turn off the server; then,disconnect all power cords and external cables. See th

Seite 128

Table 23. System board jumpers (continued)Jumper number Jumper name Jumper settingNotes:1. If no jumper is present, the server responds as if the pins

Seite 129 - Removing the DIMM air baffle

Table 24. RAID configuration utilities (continued)RAID configuration utility Description LocationWhere to find moreinformationMegaRAID BIOSConfigurati

Seite 130 - Supported memory types

v If you install a different type of RAID controller, see the documentation that comes with the controllerfor information about viewing and changing s

Seite 131 - Registered DIMMs (RDIMMs)

Using the WebBIOS utilityThe WebBIOS configuration utility enables you to create and manage RAID configurations on LSI SAScontrollers. The WebBIOS uti

Seite 132 - Removing a memory module

Attention: If you select Clear Configuration or New Configuration, all existing data in theconfiguration is deleted. Make a backup copy of any data th

Seite 133 - Installing a memory module

The EasyStartup program has the following features:v Self-booting DVDv Easy-to-use, language-selectable interfacev Integrated help systemv Automatic h

Seite 134 - Replacing hard disk drives

Note: The following language keyboards are supported: English, Dutch, French, German, Italian,Japanese, Spanish, and Turkish.You will then see one or

Seite 135 - Chapter 6. Replacing FRUs 127

14 ThinkServer ThinkServer RS210, Types 6531, 6532, 6533, and 6534: Hardware Maintenance Manual

Seite 136

Note: The disk that you select must be set as the boot disk in UEFI.v Partitions options: This task enables you to choose whether you want to repartit

Seite 137 - Chapter 6. Replacing FRUs 129

The following items are downloadable at http://www.lenovo.com/support:v Diagnostics programsv IMM firmwarev Ethernet firmwareUsing the EasyUpdate Firm

Seite 138 - Removing a PCI card

To force the server to start from the backup copy, turn off the server; then, place jumper JP6 in thebackup position (pins 2 and 3).v Pins 1 and 2: Bo

Seite 139 - Chapter 6. Replacing FRUs 131

Using the integrated management moduleThe integrated management module (IMM) is a second generation of the functions that were formerlyprovided by the

Seite 140 - Installing a PCI card

IBM Advanced Settings Utility programThe IBM Advanced Settings Utility (ASU) program is an alternative to the UEFI Setup Utility program formodifying

Seite 141 - Chapter 6. Replacing FRUs 133

4. Download Microsoft Web Services Enhancement 2.0 Service Pack 3 (LANDesk Process Manager only)from the following Web site: http://www.microsoft.com/

Seite 142

Uninstalling the LANDesk Software AgentIf the Core Server has LANDesk agents on it from a previous Management Suite release, it will fail theautorun p

Seite 143 - 2 Front panel USB connector

2. When the prompt <F1> Setup is displayed, press F1. (This prompt is displayed on the screen for onlya few seconds. You must press F1 quickly.)

Seite 144 - Removing the drive cage

1. Go to http://www.lenovo.com/support.2. Enter your product number (machine type and model number) or select Servers and Storage from theSelect your

Seite 145 - Chapter 6. Replacing FRUs 137

Appendix. NoticesLenovo may not offer the products, services, or features discussed in this document in all countries.Consult your local Lenovo repres

Seite 146 - Installing the drive cage

Chapter 3. General CheckoutYou can solve many problems without outside assistance by following the troubleshooting procedures inthis Hardware Maintena

Seite 147 - Chapter 6. Replacing FRUs 139

TrademarksThe following terms are trademarks of Lenovo in the United States, other countries, or both:LenovoLenovo logoThinkServerThe following terms

Seite 148 - Removing the microprocessor

Product recycling and disposalThis unit must be recycled or discarded according to applicable local and national regulations. Lenovoencourages owners

Seite 149 - Installing the microprocessor

Compliance with Republic of Turkey Directive on the Restriction ofHazardous SubstancesMeets requirements of the Republic of Turkey Directive on the Re

Seite 150

Battery return programThis product may contain a lithium or lithium ion battery. Consult your user manual or service manualfor specific battery inform

Seite 151 - Thermal grease

any potential effects of batteries and accumulators on the environment and human health due to thepotential presence of hazardous substances. For prop

Seite 152 - Removing the system board

United Kingdom telecommunications safety requirementNotice to CustomersThis apparatus is approved under approval number NS/G/1234/J/100003 for indirec

Seite 153 - Installing the system board

Informationen in Hinsicht EMVG Paragraf 4 Abs. (1) 4:Das Gerät erfüllt die Schutzanforderungen nach EN 55024 und EN 55022 Klasse A.Nach der EN 55022:

Seite 154 - Replacing the power supply

People’s Republic of China Class A warning statementKorea Class A warning statementAppendix. Notices 229

Seite 155 - Removing the power supply

230 ThinkServer ThinkServer RS210, Types 6531, 6532, 6533, and 6534: Hardware Maintenance Manual

Seite 156 - Installing the power supply

IndexAABR, automatic boot failurerecovery 102acoustical noise emissions 12administrator password 202air deflectorimportant note 147location 147ASM eve

Seite 157 - Removing a fan assembly

Performing the checkout procedureTo perform the checkout procedure, complete the following steps:1. Is the server part of a cluster?v No: Go to step 2

Seite 158 - Installing a fan assembly

FRUs, replacing (continued)optical cable 162PCI-X riser-card power cable 168power supply 146SAS/SATA backplane 154the ServeRAID-BR10il SAS/SATAcontrol

Seite 159 - Removing the battery

PCI card (continued)replacing 130PCI card, installation 132PCI expansion slots 11PCI riser-card assemblyremoving 157replacing 157PCI slot error LEDs 6

Seite 160 - Microprocessor

three boot failure 102TOE 1 1tools, diagnostic 19trademarks 222troubleshooting procedures 18start here 15turning off the server 113integrated baseboar

Seite 162

Part Number: XXXXXXPrinted in USA(1P) P/N: XXXXXX

Seite 163 - 2 Guide channels

The four problem-resolution procedures are presented in the order in which they are most likely tosolve your problem. Follow these procedures in the o

Seite 164 - 2 Connectors 4 Connectors

Lenovo service bulletins document known problems and suggested solutions. To search for servicebulletins, complete the following steps.1) Go to: http:

Seite 165 - Chapter 6. Replacing FRUs 157

Chapter 4. DiagnosticsThis chapter describes the diagnostic tools that are available to help you solve problems that might occurin the server.Diagnost

Seite 166

v System-event log: This log contains messages that were generated during POST and all system statusmessages from the service processor. You can view

Seite 167 - Chapter 6. Replacing FRUs 159

Table 2. Methods for viewing event logs (continued)Condition ActionThe server is hung.v If DSA Preboot is installed, restart the server and pressF2 to

Seite 168

ThinkServer ThinkServer RS210, Types 6531, 6532,6533, and 6534Hard ware Maintenan ce Man ual

Seite 169 - Chapter 6. Replacing FRUs 161

v Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Chapter 7, “Parts listing,

Seite 170 - Removing the DVD drive cable

v Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Chapter 7, “Parts listing,

Seite 171 - Chapter 6. Replacing FRUs 163

v Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Chapter 7, “Parts listing,

Seite 172 - Removing a DVD drive

v Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Chapter 7, “Parts listing,

Seite 173 - Installing a DVD drive

v Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Chapter 7, “Parts listing,

Seite 174

v Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Chapter 7, “Parts listing,

Seite 175

v Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Chapter 7, “Parts listing,

Seite 176

v Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Chapter 7, “Parts listing,

Seite 177 - Chapter 6. Replacing FRUs 169

Integrated management module error messagesThe following table describes the IMM error messages and suggested actions to correct the detectedproblems.

Seite 178

v Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Chapter 7, “Parts listing,

Seite 179 - Updating the DMI/SMBIOS data

Note: Before using this information and the product it supports, read the general information in “Notices,” on page 221 and theWarranty and Support In

Seite 180

v Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Chapter 7, “Parts listing,

Seite 181 - Chapter 6. Replacing FRUs 173

v Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Chapter 7, “Parts listing,

Seite 182 - Connecting the cables

v Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Chapter 7, “Parts listing,

Seite 183 - Chapter 6. Replacing FRUs 175

v Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Chapter 7, “Parts listing,

Seite 184

v Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Chapter 7, “Parts listing,

Seite 185

v Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Chapter 7, “Parts listing,

Seite 186

v Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Chapter 7, “Parts listing,

Seite 187 - Replaceable server components

v Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Chapter 7, “Parts listing,

Seite 188

v Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Chapter 7, “Parts listing,

Seite 189

v Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Chapter 7, “Parts listing,

Seite 190

ContentsChapter 1. About this manual ...1Important Safety Information ...1Safety statements ...

Seite 191

v Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Chapter 7, “Parts listing,

Seite 192

v Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Chapter 7, “Parts listing,

Seite 193

v Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Chapter 7, “Parts listing,

Seite 194

v Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Chapter 7, “Parts listing,

Seite 195

v Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Chapter 7, “Parts listing,

Seite 196

v Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Chapter 7, “Parts listing,

Seite 197

v Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Chapter 7, “Parts listing,

Seite 198

v Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Chapter 7, “Parts listing,

Seite 199

Troubleshooting tablesUse the troubleshooting tables to find solutions to problems that have identifiable symptoms.If you have just added new software

Seite 200

DVD drive problemsv Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Chapter 7

Seite 201

Recovering the server firmware ...100Automated boot recovery (ABR) ...102Three boot failure ...

Seite 202 - Power cords

General problemsv Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Chapter 7,

Seite 203

v Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Chapter 7, “Parts listing,

Seite 204

v Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Chapter 7, “Parts listing,

Seite 205 - Lenovo Power cord part

Intermittent problemsv Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Chapte

Seite 206

Keyboard, mouse, or pointing-device problemsv Follow the suggested actions in the order in which they are listed in the Action column until the proble

Seite 207

Memory problemsv Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Chapter 7, “

Seite 208 - Setup Utility menu choices

Microprocessor problemsv Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Chap

Seite 209

Monitor problemsSome monitors have their own self-tests. If you suspect a problem with your monitor, see thedocumentation that comes with the monitor

Seite 210

v Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Chapter 7, “Parts listing,

Seite 211 - Power-on password

Optional-device problemsv Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Cha

Seite 212 - Resetting passwords

Removing the system board ...144Installing the system board ...145Replacing the power supply ...

Seite 213 - Configuring RAID controllers

Power problemsv Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Chapter 7, “P

Seite 214

v Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Chapter 7, “Parts listing,

Seite 215 - Formatting a hard disk drive

v Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Chapter 7, “Parts listing,

Seite 216 - Starting the WebBIOS utility

Universal Serial Bus (USB) port problemsv Follow the suggested actions in the order in which they are listed in the Action column until the problem is

Seite 217 - Using the EasyStartup DVD

3. Remove the server cover and look inside the server for lit LEDs. Certain components inside the serverhave LEDs that will be lit to indicate the loc

Seite 218 - Setup and configuration

v Follow the suggested actions in the order in which they are listed in the Action column until the problem issolved.v See Chapter 7, “Parts listing,

Seite 219 - Configuring RAID

Table 4. System pulse LEDsLED Description ActionEnclosure manager heartbeat power-on and power-off sequencing.1. If the LED flashes at 1Hz, it isfunct

Seite 220 - Updating the firmware

Utilities are available to reset and update the diagnostics code on the integrated USB flash device, if thediagnostic partition becomes damaged and do

Seite 221 - Recovering the UEFI firmware

Diagnostic messagesThe following table describes the messages that the diagnostic programs might generate and suggestedactions to correct the detected

Seite 222

Table 5. DSA Preboot messages (continued)v Follow the suggested actions in the order in which they are listed in the Action column until the problem i

Seite 223

EasyStartup overview ...210Installing your operating system without using EasyStartup...212Updating the firm

Seite 224 - Installation order

Table 5. DSA Preboot messages (continued)v Follow the suggested actions in the order in which they are listed in the Action column until the problem i

Seite 225

Table 5. DSA Preboot messages (continued)v Follow the suggested actions in the order in which they are listed in the Action column until the problem i

Seite 226

Table 5. DSA Preboot messages (continued)v Follow the suggested actions in the order in which they are listed in the Action column until the problem i

Seite 227

Table 5. DSA Preboot messages (continued)v Follow the suggested actions in the order in which they are listed in the Action column until the problem i

Seite 228 - UEFI update and configuration

Table 5. DSA Preboot messages (continued)v Follow the suggested actions in the order in which they are listed in the Action column until the problem i

Seite 229 - Appendix. Notices

Table 5. DSA Preboot messages (continued)v Follow the suggested actions in the order in which they are listed in the Action column until the problem i

Seite 230 - Important notes

Table 5. DSA Preboot messages (continued)v Follow the suggested actions in the order in which they are listed in the Action column until the problem i

Seite 231 - Appendix. Notices 223

Table 5. DSA Preboot messages (continued)v Follow the suggested actions in the order in which they are listed in the Action column until the problem i

Seite 232 - Hazardous Substances

Table 5. DSA Preboot messages (continued)v Follow the suggested actions in the order in which they are listed in the Action column until the problem i

Seite 233 - Battery return program

Table 5. DSA Preboot messages (continued)v Follow the suggested actions in the order in which they are listed in the Action column until the problem i

Seite 234

Chapter 1. About this manualThis Hardware Maintenance Manual contains information to help you solve problems that might occur inyour server. It descri

Seite 235 - Appendix. Notices 227

Table 5. DSA Preboot messages (continued)v Follow the suggested actions in the order in which they are listed in the Action column until the problem i

Seite 236 - '()*+,-./012。

Table 5. DSA Preboot messages (continued)v Follow the suggested actions in the order in which they are listed in the Action column until the problem i

Seite 237 - Appendix. Notices 229

Table 5. DSA Preboot messages (continued)v Follow the suggested actions in the order in which they are listed in the Action column until the problem i

Seite 238

Table 5. DSA Preboot messages (continued)v Follow the suggested actions in the order in which they are listed in the Action column until the problem i

Seite 239

Table 5. DSA Preboot messages (continued)v Follow the suggested actions in the order in which they are listed in the Action column until the problem i

Seite 240

Table 5. DSA Preboot messages (continued)v Follow the suggested actions in the order in which they are listed in the Action column until the problem i

Seite 241

Table 5. DSA Preboot messages (continued)v Follow the suggested actions in the order in which they are listed in the Action column until the problem i

Seite 242

Table 5. DSA Preboot messages (continued)v Follow the suggested actions in the order in which they are listed in the Action column until the problem i

Seite 243

Table 5. DSA Preboot messages (continued)v Follow the suggested actions in the order in which they are listed in the Action column until the problem i

Seite 244 - (1P) P/N: XXXXXX

Table 5. DSA Preboot messages (continued)v Follow the suggested actions in the order in which they are listed in the Action column until the problem i

Kommentare zu diesen Handbüchern

Keine Kommentare