Lenovo THINK CENTRE 9159 Bedienungsanleitung PDF herunterladen (Seite 27)

7. Align the drive bay assembly with the two slots and rails on the sides of the

chassis and connect the flat cable to the new drive.

What to do next:

v To work with another option, go to the appropriate section.

v To complete the installation, go to Capitolo 4, “Completing the parts

replacement”, a pagina 31.

Replacing the battery

Your computer has a special type of memory that maintains the date, time, and

settings for built-in features, such as parallel-port assignments (configuration). A

battery keeps this information active when you turn off the computer.

The battery normally requires no charging or maintenance throughout its life;

however, no battery lasts forever. If the battery fails, the date, time, and

configuration information (including passwords) are lost. An error message is

displayed when you turn on the computer.

Refer to the "Lithium battery notice" in the Safety and Warranty Guide for

information about replacing and disposing of the battery.

To change the battery:

1. Turn off the computer and disconnect the power cord from the electrical outlet

and from the computer.

2. Remove the computer cover. See “Removing the cover” a pagina 9.

3. You might have to access the system board components. See “Accessing system

board components and drives” a pagina 10.

4. Locate the battery. See Figura 3 a pagina 6.

5. Remove the old battery.

6. Install the new battery.

Figura 20. Battery removal

Capitolo 3. Installing options and replacing hardware 19

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 47 48

Keine Kommentare

Lenovo THINK CENTRE 9159 Bedienungsanleitung Seite 27