Lenovo Storage Array 8332 Bedienungsanleitung Seite 23

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 44
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 22
Planning and configuring your installation
Refer to “Planning your installation” on page 13 for information on overall system
configuration requirements.
Refer to the Secure Managed Client (SMC) - Storage Array Setup Poster that shipped
with your system for instructions on installing the processors, drives, and memory.
Rack installation prerequisites
The SMC - Storage Array is designed for installation into an industry standard
48.26-cm (19-inch) cabinet capable of holding the unit.
v Minimum depth: 70.76 cm (27.83 inches) from rack posts to maximum extremity
of enclosure (excludes rear cabling).
v Weight: up to 30 kg (66.20 lb), dependent upon configuration, per enclosure.
v A minimum gap of 2.54-cm (1-inch) clearance is required between the rack cover
and front of drawer. A 5.08 cm (2-inch) rear clearance between rear of drawer
and rear of rack is recommended to maintain correct airflow around the
enclosure.
v The rack should present a maximum back pressure of 0.5 mm (5 pascals) water
gauge.
Figure 14. Unpacking the SMC - Storage Array
Chapter 3. Getting Started 15
Seitenansicht 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare