Lenovo E200 Bedienungsanleitung PDF herunterladen (Seite 70)

Diagnostic Error Code FRU/Action

018-197-XXX

PCI Card test warning

1. Make sure the component that is called

out is connected and/or enabled. See

Chapter 6, “Using the Setup Utility,” on

page 49

2. Re-run test

3. Replace the component that is called out

in warning statement

4. Replace the component under test

018-198-XXX

PCI Card test aborted

1. If a component is called out, make sure

it is connected and/or enabled. See

Chapter 6, “Using the Setup Utility,” on

page 49

2. Flash the system and re-test. See “Flash

update procedures” on page 111

3. Go to “Undetermined problems” on page

78

018-199-XXX

PCI Card test failed, cause unknown

1. Go to “Undetermined problems” on page

78

2. Flash the system and re-test. See “Flash

update procedures” on page 111

3. Replace component under function test

018-250-XXX

PCI Card Services error

1. PCI card

2. Riser card, if installed

3. System board

020-000-XXX

PCI Interface Test Passed

No action

020-0XX-XXX

PCI Interface error

1. PCI card

2. Riser card, if installed

3. System board

020-195-XXX

PCI Test aborted by user

Information only

Re-start the test, if necessary

020-196-XXX

PCI test halt, error threshold exceeded

1. Press F3 to review the log file

2. Re-start the test to reset the log file

020-197-XXX

PCI test warning

1. Make sure the component that is called

out is connected and/or enabled. See

Chapter 6, “Using the Setup Utility,” on

page 49

2. Re-run test

3. Replace the component that is called out

in warning statement

4. Replace the component under test

64 Lenovo E200 Hardware Maintenance Manual

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 123 124

Kommentare zu diesen Handbüchern

Keine Kommentare