Lenovo USB 2.0 CD-RW/DVD-ROM Combo II Drive Bedienungsanleitung PDF herunterladen (Seite 24)

2 Eject button Press this button to eject the disc tray.

Attention: An electrical locking mechanism is used in this

drive so that an erroneous operation does not eject the disc

tray during write. Make sure that the power is on and the

drive is not in a write operation before pressing the eject

button to open the tray.

If the tray cannot be opened even when the eject button is

pressed or if the disc tray needs to be opened when power is

not supplied from the AC adapter, use the emergency eject

lever at the bottom of the drive.

3 Disc tray Set the media with the label face up on the disc tray.

4 DC IN connector Connect the provided AC adapter or cable DC IN connectors.

This drive can also be used under USB Power only with

certain limitations (refer to “Configuration 2: standard USB

bus power configuration” on page 1-4.)

5 USB connector Insert the plug of the provided dedicated USB cable.

Figure 4-2. Rear view of the Combo II Drive

Figure 4-3. Top view of the Combo II Drive

4-2 USB 2.0 CD-RW/DVD-ROM Combo II Drive: User ’s Guide

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 73 74

Keine Kommentare

Lenovo USB 2.0 CD-RW/DVD-ROM Combo II Drive Bedienungsanleitung Seite 24