Lenovo USB 2.0 CD-RW/DVD-ROM Combo II Drive Bedienungsanleitung Seite 23

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 74
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 22
Chapter 4. Preparing to use the Combo II Drive
Before using the Combo II Drive, follow the procedure below:
1. Make sure the Combo II Drive is properly connected to your ThinkPad
computer.
2. Check the locations of the functions on the Combo II Drive (refer to the figures
below).
3. Insert the USB 2.0 CD-RW/DVD-ROM Combo II Drive Software and
Users Guide Super CD that was shipped with this option to install the
CD-R/CD-RW writing software or DVD read software.
4. Double-click on the application you want and follow the instructions on the
screen.
5. Check that the drive operates normally and keep the enclosed warranty in a
safe place after filling it in.
Following are the locations of the functions on the Combo II Drive:
1 Power/Busy indicator The green LED indicates the power status and the operation
states of the drive.
v LED is on: during data read or seek
v LED blinks slowly: during data write
v LED blinks quickly: during disc recognition
v LED is off: when the drive is not being accessed (even
though it may be connected to your system)
Figure 4-1. Front view of the Combo II Drive
© Lenovo 2006. Portions © IBM Corp. 2004. 4-1
Seitenansicht 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 73 74

Kommentare zu diesen Handbüchern

Keine Kommentare