Lenovo THINKCENTRE 8177 Bedienungsanleitung PDF herunterladen (Seite 76)

Diagnostic Error Code FRU/Action

015-034-XXX

USB port buffer

allocation failure

1. Reboot the system

2. Flash the system and re-test. See “Flash

update procedures” on page 214

3. Run memory test

4. System board

015-035-XXX

USB port Reset condition detected

1. Remove USB device(s) and re-test

2. System board

015-036-XXX

USB port Register error

System board

015-040-XXX

USB port IRQ failure

1. Run setup and check for conflicts

2. Flash the system. See “Flash update

procedures” on page 214

3. System board

015-195-XXX

USB port Test aborted by user

Information only

Re-start the test, if necessary

015-196-XXX

USB port test halt, error threshold exceeded

1. Press F3 to review the log file

2. Re-start the test to reset the log file

015-197-XXX

USB port test warning

1. Make sure the component that is called

out is connected and/or enabled. See

Chapter 6, “Using the Setup Utility,” on

page 55

2. Re-run test

3. Replace the component that is called out

in warning statement

4. Replace the component under test

015-198-XXX

USB port test aborted

1. If a component is called out, make sure

it is connected and/or enabled. See

Chapter 6, “Using the Setup Utility,” on

page 55

2. Flash the system and re-test. See “Flash

update procedures” on page 214

3. Go to “Undetermined problems” on page

90

015-199-XXX

USB port test failed, cause unknown

1. Go to “Undetermined problems” on page

90

2. Flash the system and re-test. See “Flash

update procedures” on page 214

3. Replace component under function test

018-000-XXX

PCI Card Test Passed

No action

018-0XX-XXX

PCI Card Failure

1. Riser card, if installed

2. System board

018-195-XXX

PCI Card Test aborted by user

1. PCI card

2. Information only

Re-start the test, if necessary

70 Hardware Maintenance Manual

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 227 228

Kommentare zu diesen Handbüchern

Keine Kommentare