Lenovo THINKCENTRE 8177 Bedienungsanleitung PDF herunterladen (Seite 139)

10. For bay 5 (hard disk drive), pivot the drive cage to the closed position.

11. If the front bezel was removed, replace it by aligning and pressing the bezel

into position.

12. Go to “Closing the cover and connecting cables.”

Closing the cover and connecting cables

After replacing FRUs, you need to install any removed parts, replace the cover, and

reconnect any cables, including telephone lines and power cords. Also, depending

on the FRU that is replaced, you might need to confirm the updated information in

the Setup Utility program.

1. Ensure that all components have been reassembled correctly and that no tools

or loose screws are left inside the computer.

2. Clear any cables that might impede the replacement of the cover.

3. Position the cover on the chassis so that the rail guides on the bottom of the

cover engage the rails and push the cover closed until it latches.

4. Reconnect the external cables and power cords to the computer.

5. To update the configuration, see Chapter 6, “Using the Setup Utility,” on page

55.

Chapter 10. Replacing FRUs (Types 8084, 8085, 8147, 8148, and 8179 133

1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 227 228

Keine Kommentare

Lenovo THINKCENTRE 8177 Bedienungsanleitung Seite 139