Lenovo THINKCENTRE 8177 Bedienungsanleitung PDF herunterladen (Seite 138)

5. For all drives except the hard disk drive, push in on the metal tab that secures

the drive being removed. The hard disk drive tray pivots out toward the front

of the computer for removal of the hard disk drive. See the following

illustrations.

For the hard disk drive, see the illustration below.

6. Slide the drive out the front of the computer.

7. Make sure the drive that you are installing is set correctly as either a master

or a slave device. Jumper the new drive the same as the drive being replaced.

Note: If you are installing a serial ATA drive, no master/slave jumpering is

necessary.

Refer to the documentation that comes with your drive for master/slave

jumper information.

8. Slide the drive into the appropriate bay.

9. Reconnect the signal and power cables to the new drive.

132 Hardware Maintenance Manual

1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 227 228

Keine Kommentare

Lenovo THINKCENTRE 8177 Bedienungsanleitung Seite 138