Lenovo THINKCENTRE 8177 Bedienungsanleitung PDF herunterladen (Seite 109)

Note: This illustration shows the hard disk drive being removed. All drives

are removed in the same manner. However, it is only necessary to

remove the front bezel when removing the hard disk drive or diskette

drive.

7. Make sure the drive that you are installing is set correctly as either a master

or a slave device. Jumper the new drive the same as the drive being replaced.

Note: If you are installing a serial ATA drive, no master/slave jumpering is

necessary.

Refer to the documentation that comes with your drive for master/slave

jumper information.

8. Install the new drive into the bay. Align the screw holes and install the screws

to secure the drive.

Chapter 8. Replacing FRUs (Types 8126, 8174, 8175, and 8176) 103

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 227 228

Keine Kommentare

Lenovo THINKCENTRE 8177 Bedienungsanleitung Seite 109