Lenovo THINKCENTRE 8177 Bedienungsanleitung PDF herunterladen (Seite 105)

Removing and replacing the system board

1. Remove the cover. See “Removing the cover” on page 92.

2. Remove any PCI adapters installed. See “Removing and replacing a PCI

adapter” on page 96.

3. Remove any air baffles or ducts.

4. Carefully take note of the location of all cable connections on the system

board. It will be necessary to reconnect them properly when installing a new

system board. See “Identifying parts on the system board” on page 95.

5. Disconnect all cables connected to the system board.

6. Remove the screws that secure the system board in place and remove the

system board.

7. Take note of the location of the DIMMs and remove them from the failing

system board and install them on the new system board in the same location

as they were on the failing system board. See “Removing and replacing

memory” on page 96.

8. Remove the heat sink and microprocessor from the failing system board and

install them on the new system board. See “Removing and replacing the

microprocessor.” Continue at the next step after installing the heat sink and

microprocessor on the new system board.

9. Install the new system board and insert the screws.

10. Reconnect all cables to the system board.

11. Replace any air baffles or ducts.

12. Go to “Closing the cover and connecting cables” on page 104.

Removing and replacing the microprocessor

1. Remove the cover. See “Removing the cover” on page 92.

2. Remove any air baffles or ducts that cover the microprocessor.

3. Disconnect the heat sink fan cable from the system board. Refer to

“Identifying parts on the system board” on page 95.

Chapter 8. Replacing FRUs (Types 8126, 8174, 8175, and 8176) 99

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 227 228

Keine Kommentare

Lenovo THINKCENTRE 8177 Bedienungsanleitung Seite 105