Lenovo THINKCENTRE 6019 Bedienungsanleitung PDF herunterladen (Seite 79)

Diagnostic Error Code FRU/Action

175-195-XXX

Thermal Sensor(s) Test aborted by user

Information only

Re-start the test, if necessary

175-196-XXX

Thermal Sensor(s) test halt, error threshold

exceeded

1. Press F3 to review the log file

2. Re-start the test to reset the log file

175-197-XXX

Thermal Sensor(s) test warning

1. Make sure the component that is called

out is connected and/or enabled. See

Chapter 6, “Using the Setup Utility,” on

page 49

2. Re-run test

3. Replace the component that is called out

in warning statement

4. Replace the component under test

175-198-XXX

Thermal Sensor(s) test aborted

1. If a component is called out, make sure

it is connected and/or enabled

2. Flash the system and re-test. See

“Updating (flashing) BIOS from a

CD-ROM or diskette” on page 494

3. Go to “Undetermined problems” on page

80

175-199-XXX

Thermal Sensor(s) test failed, cause

unknown

1. See “Undetermined problems” on page

80

2. Flash the system and re-test. See

“Updating (flashing) BIOS from a

CD-ROM or diskette” on page 494

3. Replace component under function test

175-250-XXX

175-251-XXX

Thermal Sensor(s) limit error

1. Check fans

2. Check Power supply voltages

3. Microprocessor

4. System board

185-000-XXX

Asset Security Test Passed

No action

185-XXX-XXX

Asset Security failure

1. Flash system

2. System board

185-278-XXX

Asset Security Chassis Intrusion

1. Assure Asset Security Enabled

2. C2 Cover Switch

3. System board

201-000-XXX

System Memory Test Passed

No action

201-XXX-XXX

System Memory error

1. Replace the memory module called out

by the test

2. System board

202-000-XXX

System Cache Test Passed

No action

202-XXX-XXX

System Cache error

1. Cache, if removable

2. System board

3. Microprocessor

Chapter 7. Symptom-to-FRU Index 73

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 505 506

Kommentare zu diesen Handbüchern

Keine Kommentare