Lenovo THINKCENTRE 6019 Bedienungsanleitung Seite 117

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 506
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 116
4. Remove the plastic fan mount behind the bezel by releasing the retaining tabs
with your fingers and sliding the fan mount out of the chassis.
5. The fan assembly is mounted with four rubber mounts that protrude through
the plastic mounting bracket and the fan housing. Remove the fan assembly
by pulling the rubber mounts back through the holes in the fan housing.
6. Pull the rubber mounts loose from the mounting bracket. New rubber mounts
might come with the new fan.
7. Install the rubber mounts back into the mounting bracket.
8. Install the new fan assembly by aligning the rubber mounts in the mounting
bracket with the holes in the fan housing and pulling the rubber mounts
through the holes with your fingers.
9. Reinstall the fan mounting bracket into the chassis.
10. Reconnect the fan cable, power switch/LED cable, and temperature sensor
cable to the system board. See “System board connectors” on page 87.
11. Go to “Completing the FRU replacement” on page 112.
Chapter 8. Replacing FRUs - Desktop computers 111
Seitenansicht 116
1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 505 506

Kommentare zu diesen Handbüchern

Keine Kommentare