Lenovo THINKCENTRE 6019 Bedienungsanleitung PDF herunterladen (Seite 103)

100

101

Replacing the system board

Important

The heat sink and microprocessor might be very hot. Make sure these

components are cool enough to safely handle before continuing this

procedure.

Note: When replacing the system board you must also order a new retention

module for the new system board or remove the retention module from the

failing system board and install it on the new system board.

This procedure describes how to remove and replace the system board.

1. Open the computer cover. See “Opening the cover” on page 88.

2. Pivot the drive-bay assembly upward to gain access to the heat sink.

3. Remove the hard disk drive and disconnect it from the system board. See

“Replacing the hard disk drive” on page 104.

4. Remove any PCI adapters installed. See “Replacing an adapter card” on page

90.

5. Disconnect all cables connected to the system board. See “System board

connectors” on page 87.

6. Pull up on the blue strap at the front of the system board to release it from

the chassis.

Chapter 8. Replacing FRUs - Desktop computers 97

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 505 506

Kommentare zu diesen Handbüchern

Keine Kommentare

Lenovo THINKCENTRE 6019 Bedienungsanleitung Seite 103

Kommentare zu diesen Handbüchern