Lenovo THINKCENTRE 6019 Bedienungsanleitung PDF herunterladen (Seite 102)

100

101

10. Slide the power-supply assembly toward the front of the chassis and remove

it from the computer.

11. Install the new power-supply assembly into the chassis so that the screw holes

in the power-supply assembly align with those in the chassis.

Note: Use only the screws provided by Lenovo.

12. Install and tighten the four screws at the rear of the chassis to secure the

power-supply assembly.

13. Check the position of the voltage-selection switch on the rear of the computer.

Use a ballpoint pen to slide the switch, if necessary.

Note: Some computers do not have a voltage switch. These computers

automatically control the voltage.

v If the voltage supply range is 100–127 V ac, set the switch to 115 V.

v If the voltage supply range is 200–240 V ac, set the switch to 230 V.

14.

Reconnect all the power supply cables to the drives and the system board.

15. Go to “Completing the FRU replacement” on page 112.

96 Hardware Maintenance Manual

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 505 506

Kommentare zu diesen Handbüchern

Keine Kommentare

Lenovo THINKCENTRE 6019 Bedienungsanleitung Seite 102

Kommentare zu diesen Handbüchern